Roland CD-2i User Manual
55
Advanced Uses
Recording
Listening
Deleting
Creating a CD
Editing an SD
Appendices
Convenient
Functions
Information
/
Display
Checkin
g
/
Preparations
Recording a record
Here’s how to record the sound of a record.
You can connect a record player directly to the CD-2i. If your record player has a phono
equalizer, refer to “Recording a cassette or MD” (Page 52).
equalizer, refer to “Recording a cassette or MD” (Page 52).
4
Connect your audio device (e.g., cassette deck) to the CD-2i’s LINE/
PHONO IN jacks.
PHONO IN jacks.
Use audio cables to connect the CD-2i’s LINE/PHONO IN jacks to the output jacks of
your audio device (e.g., cassette deck).
your audio device (e.g., cassette deck).
fig.connect-record-e.eps
* The grounding wire from your record player should be connected to the ground terminal on the
side of the CD-2i.
5
Press the [MENU] button to access the menu screen and select “LINE/
PHONO Input.“
PHONO Input.“
fig.menu-overdub-e.eps
Press the [MENU] button to access the menu screen.
Use the [
] [
] buttons to choose “LINE/PHONO
Input.”
Press the [ENTER] button to confirm your choice.
Use the [+] [-] buttons to change the value to select
“PHONO.“
* With the factory settings, this is set to Line.
If You’re Recording to an SD
Memory Card
Memory Card
If You’re Recording to a
CD-R/RW Disc
CD-R/RW Disc
1
Turn on the power
(
☞
.
1
Turn on the power
(
☞
2
Insert the SD memory card
(
☞
2
Insert the CD
(
☞
3
Set the audio source to “SD.”
Press the [SD CARD] button so it’s lit.
fig.selectCD-e.eps
3
Set the audio source to “CD.”
Press the [CD] button so it’s lit.
fig.selectSD-e.eps
To the output jacks of
the record player
CD-2i: RCA phono type
Audio device: RCA phono type
Audio device: RCA phono type
Types of plugs that can be connected
R
L
CD-2i_e.book 55 ページ ２０１０年３月１５日 月曜日 午前１０時１５分