Roland 5100013104-02 User Manual

Page of 144
 
102
 
Making a CD-R/RW Disc for Playback on Another 
CD Player (Finalize)
 
After finalization, it will no longer be possible to record or write additional material to that disc. 
You should finalize the disc when you have completed your music CD and don’t need to write 
or record any more data.
 
* In order to perform this operation, you’ll need the included, dedicated AC adaptor.
 
1
 
Insert the CD-R/RW disc that you want to finalize.
 
2
 
Press the [EJECT (
)] button.
 
3
 
If you’re sure you want to proceed, press the [ENTER] button.
(If you decide not to finalize the disc, press the [EXIT] button.)
 
fig.finalize-mssg02-e.eps
 
The disc is finalized. During this process, a timer is displayed, counting down the time 
until finalization is completed.
When finalization is completed, the CD-R/RW disc is ejected. Your music CD is now 
ready.
Finalization is the process of writing final information (the number of songs, the song 
numbers, the playback times, etc.) to a CD-R/RW disc. When you “finalize” a CD-R/RW 
disc that was recorded or written by the CD-2i, that disc will be playable as a music CD 
in another CD player.
What’s finalization?
* If the CD-R/RW disc has already been finalized, the disc 
will be ejected when you press the [EJECT (
)] button.
Count-down (min:sec)
We cannot guarantee that a music CD created on the CD-2i will play on all CD players. 
Depending on your CD player’s support for CD-R/RW discs, music CDs you create may 
not play correctly.
With a CD-RW disc, you can remove the finalization so that you’ll again be able to record 
or write to that disc. 
Important
CD-2i_e.book 102 ページ 2010年3月15日 月曜日 午前10時15分