Sony ZS-PS20CP Leaflet

Page of 2
ZS-PS20CP.GB.3-878-117-11(1)
Disposal of waste batteries 
(applicable in the European Union 
and other European countries with 
separate collection systems)
This symbol on the battery or on the packaging indicates 
that the battery provided with this product shall not be 
treated as household waste. By ensuring these batteries 
are disposed of correctly, you will help prevent potentially 
negative consequences for the environment and human 
health which could otherwise be caused by inappropriate 
waste handling of the battery. The recycling of the 
materials will help to conserve natural resources.
In case of products that for safety, performance or data 
integrity reasons require a permanent connection with an 
incorporated battery, this battery should be replaced by 
qualified service staff only.
To ensure that the battery will be treated properly, hand 
over the product at end-of-life to the applicable collection 
point for the recycling of electrical and electronic 
equipment.
For all other batteries, please view the section on how 
to remove the battery from the product safely. Hand the 
battery over to the applicable collection point for the 
recycling of waste batteries.
For more detailed information about recycling of this 
product or battery, please contact your local Civic Office, 
your household waste disposal service or the shop where 
you purchased the product.
Notice for customers: the following 
information is only applicable 
to equipment sold in countries 
applying EU Directives
The manufacturer of this product is Sony Corporation,  
1-7-1 Konan, Minato-ku, Tokyo, Japan.
The Authorized Representative for EMC and product 
safety is Sony Deutschland GmbH, Hedelfinger Strasse 
61, 70327 Stuttgart, Germany.  For any service or 
guarantee matters please refer to the addresses given in 
separate service or guarantee documents.
Notes on DualDiscs
A DualDisc is a two sided disc product which mates DVD 
recorded material on one side with digital audio material 
on the other side. However, since the audio material side 
does not conform to the Compact Disc (CD) standard, 
playback on this product is not guaranteed.
WARNING
To reduce the risk of fire or electric shock, 
do not expose this apparatus to rain or 
moisture.
To reduce the risk of electrical shock, do 
not open the cabinet. Refer servicing to 
qualified personnel only.
To reduce the risk of fire, do not cover the ventilation of 
the apparatus with newspapers, tablecloths, curtains, etc. 
And do not place lighted candles on the apparatus.
To reduce the risk of fire or electric shock, do not expose 
this apparatus to dripping or splashing, and do not place 
objects filled with liquids, such as vases, on the apparatus.
As the main plug is used to disconnect the unit from the 
mains, connect the unit to an easily accessible AC outlet. 
Should you notice an abnormality in the unit, disconnect 
the main plug from the AC outlet immediately.
Do not install the appliance in a confined space, such as a 
bookcase or built-in cabinet.
Do not expose the batteries (battery pack or batteries 
installed) to excessive heat such as sunshine, fire or the 
like for a long time.
3-878-117-11(1)
ZS-PS20CP
Operating Instructions
GB
©2008 Sony Corporation     
Printed in China
Excessive sound pressure from earphones and 
headphones can cause hearing loss.
MPEG Layer-3 audio coding technology and patents 
licensed from Fraunhofer IIS and Thomson.
Disposal of Old Electrical & Electronic 
Equipment  
(Applicable in the European Union and 
other European countries with separate 
collection systems)
This symbol on the product or on its packaging indicates 
that this product shall not be treated as household 
waste. Instead it shall be handed over to the applicable 
collection point for the recycling of electrical and 
electronic equipment. By ensuring this product is 
disposed of correctly, you will help prevent potential 
negative consequences for the environment and human 
health, which could otherwise be caused by inappropriate 
waste handling of this product. The recycling of materials 
will help to conserve natural resources. For more detailed 
information about recycling of this product, please 
contact your local Civic Office, your household waste 
disposal service or the shop where you purchased the 
product.
Applicable accessories: Remote control
Power sources
Specifications
Tips
 Playback starts from the track/MP3/WMA file you last stopped 
playing (Resume play). During stop, the track/MP3/WMA file 
number to be played is displayed.
 To cancel resume play (to start play from the beginning of the first 
track/MP3/WMA file), press   or open the CD compartment in 
stop mode.
Note
You cannot locate a specific track/MP3/WMA file if “SHUF” or 
“PGM” is lit in the display. Turn off the indication by pressing MODE 
.
Example of folder structure and playing order
The playing order of folders and files is as follows:
Folder
MP3/WMA file
Notes on MP3/WMA discs
 When a disc is inserted, the unit reads all the files on that disc. 
During this time, “READING” is displayed. If there are many folders 
or non-MP3/WMA files on the disc, it may take a long time for play 
to begin or for the next MP3/WMA file to start play. 
Do not save unnecessary folders or files other than MP3/WMA ones 
on a disc to be used for MP3/WMA listening.
 A folder that does not include an MP3/WMA file is skipped.
 Maximum number of files: 511
 Maximum number of folders: 150 
Maximum directory steps: 8
 Folder names and file names can be displayed with up to 32 
characters.
 The characters A - Z, a - z, 0 - 9, and _ can be displayed on this unit. 
Other characters are displayed as “_”.
 This unit conforms to Version 1.1 of the ID3 tag format. If the file 
has the ID3 tag information, “song title”, “artist name”, and “album 
name” can be displayed.
 When naming, be sure to add the file extension “.mp3” or “.wma” to 
the file name.
 If you put the extension “.mp3” or “.wma” to a file other than an 
MP3/WMA file, the unit cannot recognize the file properly and will 
generate random noise that could damage your speakers.
 The file name does not correspond to the ID3 tag.
 If an MP3/WMA disc that contains over 511 files is played, the disc 
may not be played as shown in the illustration.
Listening to the radio
1
Press RADIO  on the unit (BAND  on the 
remote) repeatedly.
Each time you press the button, the indication changes 
as follows:
“FM”  “AM”.
2
Hold down TUNE + or –  until the frequency digits 
begin to change in the display.
The unit automatically scans the radio frequencies and 
stops when it finds a clear station.
If you cannot tune in a station, press TUNE + or –  
repeatedly to change the frequency step by step.
When an FM stereo broadcast is received, “ST” 
appears.
Tip
If the FM broadcast is noisy, press MODE  until “MONO” appears 
in the display and the radio will play in monaural.
Changing the AM tuning interval
If you need to change the AM tuning interval, do the 
following:
1
Press RADIO  on the unit until “AM” is displayed.
2
Press DISPLAY/ENTER  on the unit for 2 seconds.
3
Press RADIO  on the unit for 2 seconds.
“9k STEP” or “10k STEP” flashes.
4
Press PRESET + or –  on the unit to select “9k 
STEP” for 9 kHz interval or “10k STEP” for 10 kHz 
interval.
5
Press DISPLAY/ENTER  on the unit.
After changing the tuning interval, you need to reset 
your preset AM radio stations.
Opening/closing the Sliding Tray
Connecting a USB device
1
Press .
The Sliding Tray  is ejected.
2
Connect your USB device to the 
 (USB) port .
Tip
A digital music player is charged automatically in the USB mode when 
connected to the 
 (USB) port .
Closing the Sliding Tray
1
Remove the USB device (see “Listening to music of a 
USB device”).
2
Slide the Lock  as indicated by the arrow.
Lock 
3
Push the Sliding Tray  into the unit until it clicks.
Notes
 Do not carry the unit with a USB device inserted to the connector. 
Doing so may cause a malfunction.
 Be sure to store the Sliding Tray  before moving the unit.
2
to the wall outlet
1
to AC IN
Connect the AC power cord  or insert six R14 (size C) batteries (not supplied) into the battery compartment .
Notes
 Replace the batteries when the OPR/BATT  indicator dims or when the unit stops operating. 
Replace all the batteries with new ones. Before you replace the batteires, be sure to remove the CD from the unit.
 To use the unit on battery power, disconnect the AC power cord from the unit.
 When you operate the unit on battery power, you cannot turn on the unit using the remote.
Preparing the remote
Insert two R03 (size AAA) batteries (not supplied).
Replacing batteries
With normal use, the batteries should last for about six months. When the remote no longer operates the unit, replace all 
the batteries with new ones.
Basic Operations
Listening to music of a USB device
You can listen to music stored on an optional USB device 
(digital music player or USB storage media).
Music files in WMA and MP3 format* can be played on 
this unit.
See “Playable USB devices” on the back page for a list of 
USB devices that can be connected to this unit.
* Files with copyright protection (Digital Rights Management) cannot 
be played on this unit.
1
Press USB  on the unit.
2
Connect the USB device to the 
 (USB) port  (See 
“Connecting a USB device”).
“USB MEMORY” appears in the display.
3
Press  .
The unit starts playing.
File number
After the file name is displayed, the 
playing time will appear
4
Press VOLUME + or – (or VOL + or – on the remote) 
 to adjust the volume.
Other operations
To
Press
Pause playback
 . To resume play, press the 
button again*.
Stop playback
 .
Select a folder
 + or – . 
Select a file
 or  . 
Find a point in a 
file
Hold down  or   during 
playback, and release the button at 
the desired point.
Select Repeat Play REPEAT  on the unit repeatedly 
until “ ” or “  1” appears.
Remove the USB 
device
Hold down   until “NO DEV” 
appears, then remove the USB 
device.
* When playing a VBR MP3 file, the unit may resume playback from a 
different point.
Tips
 Playback starts from the MP3/WMA file you last stopped playing 
(Resume play). During stop, the MP3/WMA file number and the 
playing time to be played are displayed.
 To cancel resume play (to start play from the beginning of the first 
MP3/WMA file), press  .
Note
Always hold down   and make sure that “NO DEV” appears 
before removing the USB device. Removing the USB device while 
“NO DEV” is not displayed may corrupt the data on the USB device 
or damage the USB device itself.
To change the play mode
Press MODE  repeatedly while the USB device is not 
playing. You can select Normal Play (all files on the USB 
device (or in the selected folder while “ ” lights up) one 
after another), Shuffle Play (“SHUF” or “  SHUF”), or 
Program Play (“PGM”).
Notes on the USB device
 You cannot change the play mode during playback.
 Some time may be needed before playback starts when:
– the folder structure is complex.
– the USB device is close to capacity.
 When a USB device is connected, the unit reads all the files on the 
device. If there are many folders or files on the device, it may take a 
long time for the unit to finish reading them.
 Do not connect a USB device to the unit through a USB hub.
 For some USB devices, when an operation is performed on the USB 
device, there may be a delay before it is carried out on this unit.
 This unit may not support all the functions provided on the 
connected USB device.
 The playback order on this unit may differ from the playback order 
on the connected USB device.
 During playback, folders that contain no MP3/WMA files are 
skipped.
 This unit can play MP3 and WMA files that have the “.mp3” or 
“.wma” file extension.
 If there are files on the disc that have the “.mp3” or “.wma” file 
extension, but are not MP3/WMA files, the unit may produce noise 
or malfunction.
 A maximum of 999 MP3/WMA files and 255 folders can be 
contained on a single USB device.
  The maximum number of MP3/WMA files and folders may vary, 
depending on the file and folder structure.
 Compatibility with all MP3/WMA encoding/writing software, 
recording devices, and recording media cannot be guaranteed. If you 
use an incompatible USB device, sound skipping or noise may be 
produced, or the device may not play at all.
Connecting optional components
You can enjoy the sound from an optional component 
such as a portable digital music player through the 
speakers of this unit. Be sure to turn off the power of each 
component before making any connections. For details, 
refer to the instruction manual of the component to be 
connected.
1
Connect the AUDIO IN jack  on the unit to the line 
output jack of the portable digital music player or 
other components using an audio connecting cable 
(not supplied).
2
Turn the unit and the connected component on.
3
Press AUDIO IN  and start playing sound on the 
connected component.
The sound from the connected component is output 
from the speakers.
To connect the unit to a TV or VCR, use an extension 
cable (not supplied) with a stereo-mini jack on one end 
and two phono plugs on the other end.
Before using the unit
About the operating voltage
The unit’s operating voltage is shown on the bottom of 
the unit. For changing the AM tuning interval, radio 
frequency range, and AC operation, check the operating 
voltage of your unit.
To turn on/off the power
Press OPERATE .
To adjust the volume
Press VOLUME +, – (VOL +, – on the remote) .
To listen through headphones
Connect the headphones to the  (headphones) jack .
To reinforce the bass sound
Press MEGA BASS  on the unit.
“MEGA BASS” appears in the display.
To return to normal sound, press the button again.
Playing a CD/MP3/WMA disc
1
Press CD  on the unit.
(On the remote, press OPERATE  and then press 
FUNCTION  repeatedly until “CD” appears in the 
display.)
2
Press  PUSH OPEN/CLOSE  on the unit, and 
place a disc with the label side up in the CD 
compartment.
To close the CD compartment, press  PUSH OPEN/
CLOSE  on the unit.
3
Press  .
The unit plays all the tracks/MP3/WMA files once.
When you place MP3/WMA discs, “MP3” or “WMA” 
appears in the display after the unit reads the file 
information.
Audio CD
Track number
Playing time
MP3/WMA disc (Example: When you place MP3 disc)
File number
After the file name is displayed, the 
playing time will appear
To
Press
Pause playback
 . To resume play, press it 
again.
Stop playback
 .
Go to the next 
track/MP3/WMA 
file
 .
Go back to the 
previous track/
MP3/WMA file
 .
Select a folder on 
an MP3/WMA 
disc
 + on the unit to go forward and 
 – to go backward .
Locate a point 
while listening to 
the sound
 (forward) or  (backward) 
 on the unit while playing and 
hold it until you find the point.
Locate a point 
while observing 
the display
 (forward) or  (backward) 
 on the unit in pause and hold it 
until you find the point.
Remove the CD
 PUSH OPEN/CLOSE .
* VOLUME + (VOL + on the remote)  and   on the unit have 
a tactile dot.
Personal Audio System
Battery life
For player:
FM reception
Sony R14P: approx. 13.5 h 
Sony alkaline LR14: approx. 20 h
CD playback
Sony R14P: approx. 2.5 h
Sony alkaline LR14: approx. 7 h
Dimensions
Approx. 360 × 142 × 234 mm (w/h/d)
(14 
1
/
4
 × 5 
5
/
8
 × 9 
1
/
4
 inches) (incl. projecting parts)
Mass
Approx. 2.8 kg (6 lb 2 oz) (incl. batteries)
Supplied accessories
AC power cord (1)
Remote control (1)
Design and specifications are subject to change without notice.
Optional accessories
Sony MDR headphones series
CD player section
System
Compact disc digital audio system
Laser diode properties
Emission duration: Continuous
Laser output: Less than 44.6 µW
(This output is the value measurement at a distance of  
200mm from the objective lens surface on the  
Optical Pick-up Block with 7mm aperture.)
Spindle speed
200 r/min (rpm) to 500 r/min (rpm) (CLV)
Number of channels
2
Frequency response
20 - 20 000 Hz +1/–2 dB
Wow and flutter 
Below measurable limit
Radio section
Frequency range
FM: 87.5 - 108 MHz
AM:  531 - 1 611 kHz (9 kHz step) 
530 - 1 610 kHz (10 kHz step)
Antennas
FM: Telescopic antenna
AM: Built-in ferrite bar antenna
USB section
Supported bit rate
MP3 (MPEG 1 Audio Layer-3):
32 - 320 kbps, VBR
WMA:
16-320Kbps,VBR
Sampling frequencies
MP3 (MPEG 1 Audio Layer-3):
32/44.1/48 kHz
WMA:
32/44.1/48kHz
  (USB) port
USB-A (Full Speed)
General
Speaker
Full range: 8 cm (3 
1
/
4
 inches) dia., 4 Ω, cone type (2)
Input
  (USB) port: Type A, maximum
current 500 mA
AUDIO IN jack (stereo minijack)
Outputs
Headphones jack (stereo minijack)
For 16 - 68 Ω impedance headphones
Power output
1.7 W + 1.7 W (at 4 Ω, 10% harmonic distortion)
Power requirements
For player:
Malaysia and Singapore models: 230 – 240 V AC, 50 Hz
Thailand model: 220 V AC, 50 Hz
Korea model: 220 V AC, 60 Hz
Other models: 230 V AC, 50 Hz
9 V DC, 6 R14 (size C) batteries
For remote control: 
3 V DC, 2 R03 (size AAA) batteries
Power consumption 
AC 13 W
Music discs encoded with copyright 
protection technologies
This product is designed to playback discs that conform 
to the Compact Disc (CD) standard. Recently, various 
music discs encoded with copyright protection 
technologies are marketed by some record companies. 
Please be aware that among those discs, there are some 
that do not conform to the CD standard and may not be 
playable by this product.