Tascam CD-DJ1 User Manual

Page of 28
IMPORTANT SAFETY INSTRUCTIONS
TASCAM  CD-DJ1
 
Top panel
1
2
3
4
5
6
7
8
9
0
q
w
e
r
2- Features of the CD-DJ1
1
CD cover
  To open the CD cover, lift the cover 
from the indentations on the sides of the unit. 
When a disc is loaded and the CD cover is closed, 
the CD-DJ1 will read the disc information (TOC). 
After reading is complete, the unit will pause.
2
 
Lock lever
  When the CD cover is closed, pulling 
this lever down shows the 
LOCK
 label, indicating 
that the CD cover cannot be opened.
  Pushing the lever up shows the 
UNLOCK
 label, 
indicating that the CD cover can be opened.
CAUTION
Please set the lever to LOCK when moving the 
unit to prevent the disc from falling out.
3
 
TIME/ENTER and TITLE key
  When the home 
screen is displayed, pressing this key cycles 
through the playback time display modes in the 
following order: 
ELAPSED
(track time elapsed) 
œ
 
REMAIN
(track time remaining) 
œ
TOTAL REMAIN 
(disc time remaining).
NOTE
ELAPSED (track time elapsed) is the only 
usable time display mode for MP playback. 
REMAIN and TOTAL REMAIN modes cannot be 
used.
  When using the Setup menu, this key becomes the 
ENTER
 key.
  Pressing this key while holding down the 
SHIFT
 
key will cycle through CD text data or MP3 file 
title information.
4
PLAY MODE and SHIFT key
  Pressing this key 
cycles through the playback modes in the fol-
lowing order: Continuous playback of all tracks 
(default setting) 
œ 
Single-track playback 
œ
 
Repeat playback (all tracks) 
œ 
Single-track repeat 
playback.
  This key acts as the 
SHIFT
 key when held down 
with other keys. When used this way, the playback 
mode will not be changed.
5
 
SKIP (
µ/≤
) keys
  These allow track selection 
both during playback and while the CD is paused. 
For more information, please see 
Track selec-
tion” on page 14.
  During MP3 file playback, pressing this key while 
holding down the 
SHIFT
 key will select folders 
(see “Folder selection” on page 20).
6
 
SEARCH (
∆/˚
) keys
  Search tracks, or pitch 
bend a track when set to 
BEND using SRCH KEY 
setting in the Setup menu (see “Setup menu” on 
page 13).