JVC KD-R600 User Manual

Page of 127
ENGLISH
10
Playing a file on a USB device 
This unit can play MP3/WMA files stored on a USB mass storage class device.
You can connect a USB mass storage class device such as a USB memory, Digital Audio Player, portable HDD, etc. to 
the unit.
•  You can also connect an Apple iPod/iPhone to the USB input jack. For details of the operations, see pages 20 – 22.
1
Turn on the power.
2
Connect a USB.
All tracks will be played repeatedly until you change the source 
or disconnect a device.
USB memory
If a USB device has been attached...
Playback starts from where it has been stopped 
previously.
•  If a different USB device is currently attached, 
playback starts from the beginning.
Stop playing and detaching the USB device
Straightly pull it out from the unit.
•  “NO USB” appears. Press SRC to listen to another 
playback source.
Cautions:
•  Avoid using the USB device if it might hinder your 
safety driving.
•  Do not pull out and attach the USB device repeatedly 
while “READING” is shown on the display.
•  Do not start the car engine if a USB device is 
connected.
•  This unit may not be able to play the files depending 
on the type of USB device.
•  Operation and power supply may not work as 
intended for some USB devices.
•  You cannot connect a computer to the USB input 
terminal of the unit.
•  Make sure all important data has been backed up to 
avoid losing the data.
•  Do not leave a USB device in the car, expose to direct 
sunlight, or high temperature to avoid deformation 
or cause damages to the device.
•  Some USB devices may not work immediately after 
you turn on the power.
•  For more details about USB operations, see pages 32 
and 33.
EN02-11_KD-A605[J]f.indd   10
EN02-11_KD-A605[J]f.indd   10
11/12/08   4:42:19 PM
11/12/08   4:42:19 PM