JVC KS-FX385 User Manual
8
ENGLISH
Notes:
• A previously preset station is erased when a new
• A previously preset station is erased when a new
station is stored in the same preset number.
• Preset stations are erased when the power supply to
the memory circuit is interrupted (for example,
during battery replacement). If this occurs, preset
the stations again.
during battery replacement). If this occurs, preset
the stations again.
Tuning in to a preset station
You can easily tune in to a preset station.
Remember that you must store stations first. If
you have not stored them yet, see “Storing
stations in memory” on pages 7 and 8.
Remember that you must store stations first. If
you have not stored them yet, see “Storing
stations in memory” on pages 7 and 8.
1
Select the band (FM1 – 3, AM).
2
Select the number (1 – 6) for the
preset station you want.
preset station you want.
Manual preset
You can preset up to 6 stations in each band
(FM1, FM2, FM3, and AM) manually.
(FM1, FM2, FM3, and AM) manually.
Ex.: Storing FM station of 92.5 MHz into the
preset number 1 of the FM1 band.
1
Select the band (FM1 – 3, AM) you
want to store stations into (in this
example, FM1).
want to store stations into (in this
example, FM1).
2
Tune in to a station (in this example,
of 92.5 MHz).
of 92.5 MHz).
3
Press and hold the number button
(in this example, 1) for more than
2 seconds.
(in this example, 1) for more than
2 seconds.
4
Repeat the above procedure to store
other stations into other preset
numbers.
other stations into other preset
numbers.
Preset number flashes for a while.
To tune in to stations of
higher frequencies
higher frequencies
To tune in to stations of lower frequencies
FM1
FM2
FM3
AM
FM1
FM2
FM3
AM
EN06-08_KS-FX385[U_UH]f.p65
6/5/04, 10:57 AM
8