JVC XU-301 User Manual
25
English
6 Repeat steps 4 and 5 (this procedure can be repeated for up to 16
tracks).
•
The tracks on the MD alone or only the tracks on the CDs can be programmed also.
7 Press the
6 button to start MIX PROGRAM play.
•
The numbers of the tracks which have been played are cleared from the music calendar, and they
are displayed when play is completed.
are displayed when play is completed.
-
Operation stops automatically when all the programmed tracks have been played.
The same operating procedure is followed for programs 2 and 3.
The same operating procedure is followed for programs 2 and 3.
To cancel the programming
Press the CANCEL button. The last program setting is canceled. Press the CANCEL button repeat-
edly to cancel all the program settings.
To check the programming
To check what has been programmed while the tracks are being programmed, press the
Press the CANCEL button. The last program setting is canceled. Press the CANCEL button repeat-
edly to cancel all the program settings.
To check the programming
To check what has been programmed while the tracks are being programmed, press the
7 (stop)
button, and use the jog dial to check.
Playing MIX PROGRAMs using the remote control ————
1 Insert the MD and CDs whose tracks are to be programmed into
the main unit.
2 Select the program mode.
Example: Program 1
•
“P1 NO PROGRAM” is displayed.
3 Press the SET button.
•
“P1 S01 MD 1” is displayed.
4 Select and enter the program source.
•
Select one of the sources.
=
MD
=
CD1
=
CD2
=
CD3
= (back to the beginning)
•
When the SET button is pressed, the programming sequence and track number flash.
1 This can select the source
in the reverse direction.
in the reverse direction.
2 Then press this button.
2
4
-1
7
5
·
-1
4
-2
5
3
·
·
-2
Open the remote control’s cover.
SET
SET
07/p24-33 (E)
4/1/98, 4:43 PM
25