JVC 1009DTSMDTJEIN User Manual

ENGLISH

Listening to the USB device

(For KD-R412/KD-R411/KD-R35)

This unit can play MP3/WMA tracks stored in a USB device.

] Turn on the
power.

All tracks will be played repeatedly until you change the
source or detach the USB device.

If a USB device has been attached...
Pressing / SOURCE turns on the power and
playback starts from where it has been stopped
previously.
• If a different USB device is currently attached,

playback starts from the beginning.

Stopping playback and detaching
the USB device

Straightly pull it out from the unit.
“NO USB” appears. Press / SOURCE to listen to
another playback source.

You can operate the USB device in the same
way you operate the files on a disc.

Caution on volume setting:

USB devices produce very little noise compared
with other sources. Lower the volume before
playing a USB to avoid damaging the speakers
by sudden increase of the output level.

Cautions:

• Avoid using the USB device if it might hinder

your safety driving.

• Do not pull out and attach the USB device

repeatedly while “READING” is shown on the
display.

• Do not start the car engine if a USB device is

connected.

• This unit may not be able to play the files

depending on the type of USB device.

• Operation and power supply may not work as

intended for some USB devices.

• You cannot connect a computer to the USB

input terminal of the unit.

• Make sure all important data has been backed

up to avoid losing the data.

• Do not leave a USB device in the car, expose

to direct sunlight, or high temperature to
avoid deformation or cause damages to the
device.

• Some USB devices may not work immediately

after attaching USB device or turn on the
power.

• For more details about USB operations, see

page 19.

USB input jack

USB memory

EN10-17_KD-R412_003A_f.indd 10

10/15/09 2:29:43 PM