JVC 1009DTSMDTJEIN User Manual

Page of 62
10
ENGLISH
Listening to a USB device 
(For KD-R416/KD-R415)
This unit can play MP3/WMA tracks stored in a USB device.
~
] Turn on the 
power.
Ÿ
All tracks will be played repeatedly until you change the 
source or detach the USB device.
If a USB device has been attached...
Pressing   / SOURCE  turns on the power and 
playback starts from where it has been stopped 
previously.
• If a different USB device is currently attached, 
playback starts from the beginning.
Stopping playback and detaching 
the USB device
Straightly pull it out from the unit.
“NO USB” appears. Press   / SOURCE to listen to 
another playback source.
You can operate the USB device in the same 
way you operate the files on a disc.
 ( 
 8, 9)
Caution on volume setting:
USB devices produce very little noise compared 
with other sources. Lower the volume before 
playing a USB device to avoid damaging the 
speakers by sudden increase of the output 
level.
Cautions:
• Avoid using the USB device if it might hinder 
your safety driving.
• Do not pull out and attach the USB device 
repeatedly while “READING” is shown on the 
display.
• Do not start the car engine if a USB device is 
connected.
• This unit may not be able to play the files 
depending on the type of USB device.
• Operation and power supply may not work as 
intended for some USB devices.
• You cannot connect a computer to the USB 
input terminal of the unit.
• Make sure all important data has been backed 
up to avoid losing the data.
• Do not leave a USB device in the car, expose 
to direct sunlight, or high temperature to 
avoid deformation or cause damages to the 
device.
• Some USB devices may not work immediately 
after attaching USB device or turn on the 
power.
• For more details about USB operations, see 
pages 18 and 19.
USB input jack
USB memory
EN10-17_KD-R416_001A_5.indd   10
EN10-17_KD-R416_001A_5.indd   10
10/14/09   12:52:41 PM
10/14/09   12:52:41 PM