Kenwood KDC-U346 User Manual

English

   

|

   

2WARNING
To prevent injury or fire, take the following 
precautions:

•  To prevent a short circuit, never put or leave any 

metallic objects (such as coins or metal tools) inside 
the unit.

This unit is initially set on the Demonstration mode.
When using this unit for the first time, cancel 
the Demonstration mode. Refer to <Exit of the 
Demonstration Mode> (page 4).

•  If the unit fails to operate properly, press the Reset 

button. The unit returns to factory settings when the 
Reset button is pressed. 
1.  Release the faceplate lock so that it can be 

removed. Refer to <Removing the Faceplate> 
(page 6)

  2.  Press the Reset button and reattaching the 

faceplate.

Reset button

If the faceplate of this unit is stained, wipe it with a 
dry soft cloth such as a silicon cloth.
If the faceplate is stained badly, wipe the stain off with 
a cloth moistened with neutral cleaner, then wipe it 
again with a clean soft dry cloth.

¤

•  Applying spray cleaner directly to the unit may affect its 

mechanical parts. Wiping the faceplate with a hard cloth or 
using a volatile liquid such as thinner or alcohol may scratch 
the surface or erases characters.

•  To prevent deterioration, do not touch the terminals of the 

unit and faceplate with your fingers.

•  If the terminals on the unit or faceplate get dirty, wipe them 

with a clean soft dry cloth.

When you turn on the car heater in cold weather, 
dew or condensation may form on the lens in the 

CD player of the unit. Called lens fogging,  this 
condensation on the lens may not allow CDs to play. 
In such a situation, remove the disc and wait for the 
condensation to evaporate. If the unit still does not 
operate normally after a while, consult your Kenwood 
dealer.

•  If you experience problems during installation, 

consult your Kenwood dealer.

•  When you purchase optional accessories, check with 

your Kenwood dealer to make sure that they work 
with your model and in your area.

•  The characters which can be displayed by this unit 

are A-Z 0-9 @ “ ‘ ` % & * + – = , . / \ < > [ ] ( ) : ; ^ - { } | 
~ .

•  The illustrations of the display and the panel 

appearing in this manual are examples used to 
explain more clearly how the controls are used. 
Therefore, what appears on the display in the 
illustrations may differ from what appears on the 
display on the actual equipment, and some of the 
illustrations on the display may be inapplicable.

•  Do not touch the recording surface of the CD.
•  Do not stick tape etc. on the CD, or use a CD with 

tape stuck on it.

•  Do not use disc type accessories.
•  Clean from the center of the disc and move 

outward.

•  When removing CDs from this unit, pull them out 

horizontally.

•  If the CD center hole or outside rim has burrs, 

use the CD only after removing the burrs with a 
ballpoint pen etc.

•  CDs that are not round cannot be used.
•  CDs with coloring on the recording surface or CDs 

that are dirty cannot be used.

•  This unit can only play the CDs with 

. 

  This unit may not correctly play discs which do not 

have the mark.

•  You cannot play a CD-R or CD-RW that has not 

been finalized. (For the finalization process refer to 
your CD-R/CD-RW writing software, and your CD-R/
CD-RW recorder instruction manual.)

•  3 inch CD cannot be used. Attempt to insert using 

an adapter can cause malfunction.

B64-4531-00_00_en.indd   3

09.10.2   2:35:03 PM