McIntosh MCD201 User Manual

How to use the Remote Control

The Remote Control is capable of performing basic Oper-

ating Functions for the MCD201 SACD/CD Player.

Notes: 1. Refer to the “How to Operate” Section of this

manual for additional information using this Re-

mote Control.

2. The translucent Remote Control Push-buttons

will illuminate for approximately 3 seconds when

activated.

Play

With a disc loaded, press the PLAY Push-button to start

the disc playing.

Stop

Press the STOP Push-button to stop disc playback and

return to displaying the table of contents of the disc.

Numbered Push-buttons

Press 1 through 9 to directly access one of the first nine

Disc Tracks using the Front Panel Information Display. For

track numbers greater than 10, press the Push-button of the

tens digit first and followed by the units digit. For example,

to access Disc Track 23, press the 2 push-button and then

the 3 push-button.

Pause

Press the PAUSEPush-button to temporarily stop disc

playback at any time. Press the PAUSEPush-button a

second time to resume playback or just press the PLAY

Push-button.

REV and FF

Press and release REV (Reverse)



or FF (Fast Forward)



Push-button to start moving rapidly through a track on the

disc.

Back and Next

Press the NEXT  Push-button to move forward one track

or the BACK  Push-button to move back to the begin-

ning of the current track playing.

Note: If the

BACK  Push-button

is pressed during play-

back of the first three seconds of the track, the MCD201

will start playing back the previous track from the

beginning.

SACD/CD

Press the select the SACD or CD Tracks from a hybrid disc

for playback.

Display/Time

Press the DISPlay/TIME Push-button to access various

disc times. It also used to return the Front Panel Informa-

tion Display to indicating time instead of text information

on a SACD Disc.

Menu/Text

Press to select the various text information on a SACD

Disc such as Album, Artist and Track Titles (disc depen-

dent).

Repeat Modes

Press the RPT (Repeat) Push-button to select either the

One Track, All Tracks or cancel the Repeat Mode.

A-B Repeat

Press the A-B (Repeat) Push-button once to establish the

starting point of the repeat loop and press the A-B (Repeat)

Push-button a second time for the ending point, and that

segment of a disc to be repeated continuously.

Program

Press the PGM (Program) to activate the Programing mode

to playback only certain disc tracks in the desired order.

Review

Press the RVW (Review) Push-button to review the pro-

grammed tracks from the disc on the Front Panel Informa-

tion Display, while in the program mode.

Clear

Press the CLEAR Push-button to erase a program track(s).