Blaupunkt CM 168 User Manual

5

9

Radio mode

/

Seek tuning
Up
Down

<< / >>

>>

up in short intervals

<<

down in short intervals

Cassette mode

/

CPS function
Up
Down

Press repeatedly to skip over the cor-
responding number of songs. Press

 or << >> to stop the function.

<<

>>

3

Turn the knob to adjust the volume.

4

This feature allows you to adjust the
basic programmable settings.
For further information, refer to the
section on DSC programming.

5

Cassette slot
Insert the tape into the slot with the
open side showing to the right. The
tape will be played in direction
“TAPE 1”.

6

Display
The display indicates all settings, op-
erating modes and functions.

7

This button switches tape playback
between Tape 1 and Tape 2 (different
sides of the tape).

8

8

8

8

8

Press this button to eject the
cassette.

1

REL
To release the detachable panel (theft
protection).
Press this knob and remove the re-
lease panel.

2

Press this button to turn the unit on. It
will play at the volume set under DSC.
Mute: If you press this button briefly
during radio reception, the volume will
turn down instantly.
This function is cancelled by pressing
the ON button again. You can pro-
gramme the mute volume (refer to
“DSC programming”).
Press the button for about 1 second to
turn the unit off.

Switching on/off via the ignition:
If the unit has been connected corre-
spondingly, it can also be turned on
and off with the vehicle ignition.
If ON is pressed while no power is be-
ing supplied to the red (ignition) lead,
the unit will automatically turn off after
one hour. This prevents the battery
from going dead.