Cary Audio Design CD 306 User Manual

SPECIFICATIONS

Operating the CD-306/200 CD Transport/Processor is a simple procedure, since each unit is
designed for long term stability in virtually any home operating situation. However, if the unit is
operated outside the parameters outlined in this owner’s manual, damage may result. Please
read this manual carefully before putting your new Cary Audio Design CD-306/200 in operation.
The following definitions are applicable to this manual. Please follow these definitions
carefully.

WARNING

HAZARD PRESENTS PERSONAL INJURY OR DEATH

Caution

EQUIPMENT DAMAGE MAY OCCUR BUT NOT PERSONAL INJURY

Note

Proper performance of the CD PLAYER cannot be ensured

if disregarded

1.1 Specifications

The following section describes the CD-306/200 CD Transport/Processor basic specifications.
Specifications are subject to change without notice or obligation.

CD Mechanism                        Philips CDM12
Master Clock Jitter        Below measurable levels
Digital Filter            Pacific Microsonics PMD-200 with HDCD decoding
Digital / Analog Converters    (8) Burr Brown PCM1704u
Analog Filter                            3

Order Bessel

Analog Outputs         Balanced XLR , Single – Ended RCA
Digital Outputs           AES/EBU, Coaxial, Toslink
Digital Input            AES/EBU, Coaxial, Toslink
Digital Input Sample Rate       32kHz, 44.1kHz, 48kHz, 88.2kHz and 96kHz

Accepts 16, 20 or 24 bits

Frequency Range …………………………………… 2 Hz - 80 kHz (192kHz)
Amplitude Linearity………………………………… 0.1 dB (20Hz - 20kHz)
Phase Linearity……………………………………… 3

°(20 Hz - 20 kHz)

Dynamic Range………………………………………120dB (1kHz)
Signal-to-Noise Ratio………………………………...122dB (1kHz)
Channel Separation…………………………………. 109dB (1kHz)
Total Harmonic Distortion……………………………0.0008% (1kHz)
Audio Output Level…………………………………..Single-Ended 3.0Vrms
Balanced

XLR

6.0Vrms

Power Input        Reconfigured at factory
            100-120/200-240 Vac, 50-60 Hz
Power Consumption       35 Watts

P.2