Axor 04043XX0 User Manual

Page of 12
3
Installation Considerations
For best results, Hansgrohe recommends that this unit be installed by a licensed, profes-
sional plumber.
Please read over these instructions thoroughly before beginning installation.  Make sure 
that you have all tools and supplies needed to complete the installation.
The screws and anchors included with this set are suitable for use in a tile or other solid 
surface wall.  They are not suitable for use in an acrylic or fiberglass shower enclosure.  
Please contact the manufacturer of the enclosure regarding recommended mounting loca-
tions, reinforcement requirements, and mounting hardware.
This unit does not include a wall supply.  Use Hansgrohe model 27458XX3 or another 
supply that complies with ASME A112.18.1/CSA B125.1 including ASME A112.18.3. 
In Massachusetts, the maximum output temperature of the shower valve can be no higher 
than 11°F.
Technical Information
Croma E 75 3-Jet handshower 
.5 gpm
 
Full, massage, turbo massage
Croma E 75 -Jet handshower 
.5 gpm
 
Full, turbo massage
Clubmaster handshower 
.5 gpm
 
Full, massage, soft aerated
Raindance E 10 AIR handshower 
.5 gpm
 
AIR, Whirl AIR, Balance AIR
Monsoon II handshower 
.5 gpm
 
Full, massage, turbo massage