Pioneer KEH-P4020 User Manual
En
13
Multi-CD Player
Playing a CD
You can use this unit to control a multi-CD player,
which is sold separately.
which is sold separately.
1
TRACK NUMBER
indicator
Shows the track currently playing.
2
PLAY TIME
indicator
Shows the elapsed playing time of the cur-
rent track.
rent track.
3
DISC NUMBER
indicator
Shows the disc currently playing.
1 Press
SOURCE
to select the multi-CD
player.
2 Use
VOLUME
to adjust the sound level.
When you press
VOLUME
up/+, the volume is
raised and when pressed down/–, the volume is
lowered.
lowered.
3 Select a disc you want to listen to with the
1
to
6
buttons.
For discs located at 1 to 6, press the correspond-
ing number button.
If you want to select a disc located at 7 to 12,
press and hold the corresponding numbers
such as
ing number button.
If you want to select a disc located at 7 to 12,
press and hold the corresponding numbers
such as
1
for disc 7, until the disc number
appears in the display.
• You can also sequentially select a disc by
pressing
• You can also sequentially select a disc by
pressing
5/∞.
4 To perform fast forward or reverse, press
and hold
and hold
2
or
3
.
5 To skip back or forward to another track,
press
press
2
or
3
.
Pressing
3
skips to the start of the next track.
Pressing
2
once skips to the start of the current
track. Pressing again will skip to the previous
track.
track.
Notes
• When the multi-CD player performs the
preparatory operations,
READY
is displayed.
• If the multi-CD player does not operate prop-
erly, an error message such as
ERROR-14
may
be displayed. Refer to the multi-CD player
owner’s manual.
owner’s manual.
• If there are no discs in the multi-CD player
magazine,
NO DISC
is displayed.
3
2
1