Pioneer KEH-P4020 User Manual
Initial Settings
Additional Information
En
20
English
Español
Deutsch
F
rançais
Italiano
Nederlands
Switching the auxiliary setting
It is possible to use auxiliary equipment with
this unit. Activate the auxiliary setting when
using external equipment connected to this
unit.
this unit. Activate the auxiliary setting when
using external equipment connected to this
unit.
1 Press
AUDIO
to select
AUX
.
Press
AUDIO
repeatedly until
AUX
appears in
the display.
2 Select
AUX
on or off with
5/∞.
Pressing
5/∞ will switch
AUX
between on and
off and that status will be displayed.
Setting the time display on or off
You can turn the time display on even when the
sources and the demonstration are off.
sources and the demonstration are off.
Press
CLOCK
to select the time display.
Each press of
CLOCK
turns time display on or
off.
• The time display disappears temporarily when
you perform other operations, but the time indi-
cation is displayed again after 25 seconds.
• The time display disappears temporarily when
you perform other operations, but the time indi-
cation is displayed again after 25 seconds.
Using the AUX source
An IP-BUS-RCA Interconnector such as the
CD-RB20 or CD-RB10 (sold separately) lets you
connect this unit to auxiliary equipment featur-
ing RCA output. For more details, refer to the
IP-BUS-RCA Interconnector owner‘s manual.
CD-RB20 or CD-RB10 (sold separately) lets you
connect this unit to auxiliary equipment featur-
ing RCA output. For more details, refer to the
IP-BUS-RCA Interconnector owner‘s manual.
Selecting AUX as the source
Press
SOURCE
to select
AUX
as the source.
• If the auxiliary setting is not switched on,
AUX
cannot be selected. For more details, see
Switching the auxiliary setting on this page.
Switching the auxiliary setting on this page.