Pioneer XV-EV500 User Manual

Medium size 
screwdriver

You can find the voltage selector switch on the rear 
panel of multi-voltage models.
The factory setting for the voltage selector is 
220V–230V. Please set it to the correct voltage for 
your country or region.
• Saudi Arabia operates on 127V and 220V mains 
voltage. Please set to the correct voltage before using.
• For Taiwan, please set to 110V–127V before using.
• For Mexico, please set to 110V–127V before using.

Before changing the voltage, disconnect the AC power 
cord. Use a medium size screwdriver to change the 
voltage selector switch.

CAUTION
The STANDBY/ON switch on this unit will not 
completely shut off all power from the AC outlet. 
Since the power cord serves as the main disconnect 
device for the unit, you will need to unplug it from 
the AC outlet to shut down all power. Therefore, 
make sure the unit has been installed so that the 
power cord can be easily unplugged from the AC 
outlet in case of an accident. To avoid fire hazard, 
the power cord should also be unplugged from the 
AC outlet when left unused for a long period of time 
(for example, when on vacation). 

These speaker terminals carry 

voltage. To prevent the risk of electric shock when 
connecting or disconnecting the speaker cables, 
disconnect the power cord before touching any 
uninsulated parts.

CAUTION : USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE 

SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE.

CAUTION :   THE USE OF OPTICAL INSTRUMENTS WITH THIS PRODUCT WILL INCREASE EYE HAZARD. 

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to 
Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in 
a residential installation.  This equipment generates, uses, and can radiate radio frequency energy and,  if not 
installed and used in accordance with the instructions, may cause harmful interference to radio communications.  
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does 
cause harmful interference to radio or television reception, which can be determined by turning the equipment off 
and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  –  Reorient or relocate the receiving antenna.
  –  Increase the separation between the equipment and receiver.
  –  Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  –  Consult the dealer or an experienced radio/TV technician for help. 

Information to User
Alteration or modifications carried out without appropriate authorization may invalidate the user’s right to operate 
the equipment. 

 

CAUTION: This product satisfies FCC regulations when shielded cables and connectors are used to connect the 
unit to other equipment. To prevent electromagnetic interference with electric appliances such as radios and 
televisions, use shielded cables and connectors for connections. 

Taiwanese two pin flat-bladed plug

EV-500-1000.book 3 ページ ２００５年４月５日　火曜日　午後１２時３１分