Sony SVT-S480ES User Manual

to COM

to ALARM OUT

to COM

Commercially available
switching box, etc.

to ALARM
IN

Press MENU B.
The ALARM SET menu appears.

Press MENU V to move the flashing to the setting
of ALARM SPEED and set it by pressing MENU +
or –.

When TAPE in the GENERAL SET menu is set
to T-120:
You can set to SP 2H (for recording in 2-hour
mode in SP recording mode), EP 6H (for recording
in 6-hour mode in EP recording mode), SP 12H,
EP 18H, SP 24H, EP 30H and NC (for recording at
the same speed as before the alarm was received).

When TAPE in the GENERAL SET menu is set
to T-160:
You can set to SP 2H (for recording in 2-hour
mode in SP recording mode), EP 8H (for recording
in 8-hour mode in EP recording mode), SP 16H,
EP 24H, SP 32H, EP 40H and NC (for recording at
the same speed as before the alarm was received).

ALARM SET

ALARM MODE

1SHOT REC

REC FIELD
INTERVAL

0 1
1 m i n

ALARM SPEED

SP 2H
2 0 s

ALARM DURATION
ALARM DATA REC
TAPE END WARN.
CLOG DETECTION
SERIES REC

SELECT :

DATA SET :

–

RETURN : MENU

NEXT PUSH

OFF
COUNTER
ON
OFF

Setting the Alarm Speed and
Duration

Alarm Recording

You can use a door switch or alarm sensor to trigger
alarm recording. You can make alarm recording in
recording mode, stop mode power off mode and one-
shot recording mode with the selected recording speed.

Connecting an Alarm Sensor

Turn on the power of the equipment to be used.

Press MENU and MENU V until “3” of the MAIN
MENU flashes on the monitor screen.