Sony SVT-S480ES User Manual
52
1
Turn on the power of the equipment to be used.
2
Press MENU and MENU V until “3” of the MAIN
MENU flashes on the monitor screen.
MENU flashes on the monitor screen.
3
Press MENU B.
The ALARM SET menu appears.
The ALARM SET menu appears.
4
Press MENU V to move the flashing to the setting
of TAPE END WARN. and set to COUNTER or
TAPE END by pressing MENU + or –.
of TAPE END WARN. and set to COUNTER or
TAPE END by pressing MENU + or –.
COUNTER: the time counter shows:
“2:00:00” when using T-120 tape in SP mode,
“2:40:00” when using T-160 tape in SP mode,
“6:00:00” when using T-120 tape in EP mode,
“8:00:00” when using T-160 tape in EP mode,
and then signal is output from the TAPE END
OUT terminal (recording will be continued to
the end of the tape).
“2:40:00” when using T-160 tape in SP mode,
“6:00:00” when using T-120 tape in EP mode,
“8:00:00” when using T-160 tape in EP mode,
and then signal is output from the TAPE END
OUT terminal (recording will be continued to
the end of the tape).
TAPE END: the VCR detects the tape end.
5
Press SEARCH/AUDIO ON to return to the
normal display.
normal display.
SW OUT terminal
COM terminal
A1
ALARM SET
ALARM MODE
1SHOT REC
REC FIELD
INTERVAL
INTERVAL
0 1
1 m i n
1 m i n
ALARM SPEED
SP 2H
2 0 s
2 0 s
ALARM DURATION
ALARM DATA REC
TAPE END WARN.
CLOG DETECTION
SERIES REC
ALARM DATA REC
TAPE END WARN.
CLOG DETECTION
SERIES REC
SELECT :
DATA SET :
+
/
–
RETURN : MENU
<
NEXT PUSH
>
OFF
COUNTER
ON
OFF
COUNTER
ON
OFF
A1
ALARM SET
ALARM MODE
ALARM SPEED
ALARM SPEED
2 0 s
ALARM DURATION
ALARM DATA REC
TAPE END WARN.
CLOG DETECTION
SERIES REC
ALARM DATA REC
TAPE END WARN.
CLOG DETECTION
SERIES REC
SELECT :
DATA SET :
+
/
–
RETURN : MENU
<
NEXT PUSH
>
OFF
COUNTER
ON
OFF
COUNTER
ON
OFF
1SHOT REC
REC FIELD
INTERVAL
INTERVAL
0 1
1 m i n
1 m i n
SP 2H
DISPLAY SET
DATE
ON
BUZZER
ALARM IN
ON
TAPE END
ON
KEY IN
OFF
SW OUT
MODE
FIELD
TIMING
0 1
2H MODE
ON
TIME
ON
SPEED
ON
ALARM
ON
WARNING
ON
SELECT :
DATA SET :
+
/
–
RETURN : MENU
<NEXT PUSH >
Terminals
SW OUT Terminal
The VCR outputs a pulse signal from the SW (switch)
OUT terminal to the camera switcher to control the
switching from camera to camera.
OUT terminal to the camera switcher to control the
switching from camera to camera.
Specify the interval between each pulse signal on the
DISPLAY SET/BUZZER/SW OUT menu. Also, set
MODE to FIELD or FRAME depending on the
specifications of the camera switcher.
Available settings are:
• FIELD: 1, 2, 3, 4, 5, 10, 30, or 60 fields
• FRAME: 1, 2, 3, 4, 5, 10, 30, or 60 frames
DISPLAY SET/BUZZER/SW OUT menu. Also, set
MODE to FIELD or FRAME depending on the
specifications of the camera switcher.
Available settings are:
• FIELD: 1, 2, 3, 4, 5, 10, 30, or 60 fields
• FRAME: 1, 2, 3, 4, 5, 10, 30, or 60 frames
1
Turn on the power of the equipment to be used.
2
Press MENU and MENU V until “2” of the MAIN
MENU flashes on the monitor screen.
MENU flashes on the monitor screen.
3
Press MENU B.
The DISPLAY SET/BUZZER/SW OUT menu
appears.
The DISPLAY SET/BUZZER/SW OUT menu
appears.