Sony CFD-E95L User Manual

29

GB

• Place the CD with the label surface up.
• Clean the CD.
• Take out the CD and leave the CD

compartment open for about an hour to dry
moisture condensation.

• The CD-R/CD-RW was not finalized.

Finalize the CD-R/CD-RW with the
recording device.

• There is a problem with the quality of the

CD-R/CD-RW, recording device, or
application software.

• Replace all the batteries with new ones if they

are weak.

• Reduce the volume.
• Clean the CD, or  replace it if the CD is badly

damaged.

• Place the player in a location free from

vibration.

• Clean the lens with a commercially available

blower.

• The sound may drop out or noise may be

heard when using poor quality CD-Rs/CD-
RWs or if there is a problem with the
recording device or application software.

• Place the player on a level surface and open/

close the lid.

• Replace all the batteries with new ones if they

are weak.

• Move the player away from the TV.
• If you are using the remote while listening to

an AM (CFD-E95) or MW/LW (CFD-E95L)
radio, noise may be heard. This is
unavoidable.

• If you are listening to an FM programme near

the TV with an indoor antenna, move the
player away from the TV.

• Connect the mains lead to the AC IN socket

and a wall outlet securely.

• Make sure the batteries are inserted correctly.
• Replace all the batteries with new ones if

they are weak.

• You cannot turn on the player with the

remote when you operate the player on
batteries.

• Unplug the headphones when listening

through speakers.

• Replace all the batteries with new ones.

• Replace all the batteries with new ones if

they are weak.

• The player is in the demonstration mode.

c Set the clock, or turn on and then press

DISPLAY for about 2 seconds to cancel
the demonstration mode.

• Someone is using a portable telephone or

other equipment that emits radio waves near
the player.
c Move the portable telephone, etc., away

from the player.