Radio Shack 14-1107A User Manual
5
Checking the Battery
Condition
Condition
To check the battery’s condition,
press
press
PLAY
,
REWIND
, or
FAST-F
. If
the RECORD/BATTERY indicator
lights steadily, the batteries need re-
placing.
lights steadily, the batteries need re-
placing.
Using AC Power
You can also power the CTR-94 from
standard AC power using an AC
adapter, such as Radio Shack Cat.
No. 273-1662 (not supplied).
standard AC power using an AC
adapter, such as Radio Shack Cat.
No. 273-1662 (not supplied).
Cautions:
• The recommended adapter sup-
plies 6 volts and delivers at least
300 milliamps. Its center tip is
set to negative, and its plug cor-
rectly fits the CTR-94’s
300 milliamps. Its center tip is
set to negative, and its plug cor-
rectly fits the CTR-94’s
DC 6V
jack. Using an adapter that does
not meet these specifications
could seriously damage the
CTR-94 or the adapter.
not meet these specifications
could seriously damage the
CTR-94 or the adapter.
• Always plug the adapter into the
CTR-94 before you plug it into
the AC outlet, and always
unplug the adapter from the AC
outlet before you unplug it from
the CTR-94.
the AC outlet, and always
unplug the adapter from the AC
outlet before you unplug it from
the CTR-94.
Note: The recorder automatically
disconnects internal batteries when
you connect an AC adapter.
disconnects internal batteries when
you connect an AC adapter.
1. Set the adapter’s voltage switch
to 6V.
2. Insert the adapter’s green-tipped
barrel plug into the adapter’s
cord so it reads TIP-NEG.
cord so it reads TIP-NEG.
3. Plug the adapter’s barrel plug
into the
DC 6V
jack on the left
side of the CTR-94.
4. Plug the other end of the
adapter into a standard AC out-
let.
let.
(illus)
(illus)
(illus)
DC 6V
-
+
EAR
AUX
REM
MIC
MIN – VOLUME – MAX
14-1107.fm Page 5 Thursday, July 1, 1999 11:15 AM