Delta 14278-LHP Leaflet
®
®
U P
C
Submitted Model No.: _______________________________________________
Specific Features: __________________________________________________
STANDARD SPECIFICATIONS:
•
•
Pressure balanced single handle bath
mixing valve.
•
Requires 1 1/2" (38 mm) wall cavity.
•
Back-to-back installation capability.
•
Solid brass fabricated body.
•
Monitor
®
with Scald-Guard
®
valve. Maintains
a balanced pressure of hot and cold water
even when a valve is turned on or off
elsewhere in the system.
even when a valve is turned on or off
elsewhere in the system.
•
Temperature only controlled with handle.
•
Field adjustable to limit handle rotation into
hot water zone.
•
120° maximum handle rotation.
•
All parts shall be replaceable from the front
of the valve.
•
LHP- less handle program. See available
handle options on back
handle options on back
14178-LHP
14278-LHP
0
1
2
3
4
5
0
10
20
30
40
50
60
70
80
90
Pressure (PSI)
Flow (U.S. Gallons Per Minute)
6
0
69
138
207
276
345
414
483
552
621
0
3.8
7.6
11.4
15.1
18.9
22.7
Pressure (kPa)
Flow (Liters Per Minute)
Showerhead
Tub Filler
BATH MIXING
VALVES
VALVES
■ Leland™ Series
■ Tub Only (14178)
■ Shower Only (14278)
■ Tub/Shower (14478)
■ Single Handle
■ Monitor
®
with Scald-Guard
®
Valve
■ Pressure Balance
■ Temperature Only Controlled
with Handle
■ Universal Fittings
COMPLIES WITH:
•
•
ASME A112.18.1
•
ASSE 1016
•
CSA B125
Indicates ADA compliance to
ICC/ANSI A117.1
ICC/ANSI A117.1
•
CSA Certified
•
IAPMO Listed
Delta reserves the right (1) to make changes in specifications and materials, and (2) to change or discontinue models, both without notice or obligation. Dimensions are for reference only.
8" (203 mm) Min.-
18" (457 mm) Max.
7"
(178 mm)
A
B
2"
(51 mm)
1/2"
(13 mm)
Face of plasterguard
should be flush with
finish wall line
should be flush with
finish wall line
Maximum
Allowable Deviation
Allowable Deviation
Supply
CL Supply
Lines
Lines
Dimensions
I.P.S. or C.W.T.
2 3/8" 5/8"
I.P.S. or C.W.T. with stops 5 5/16" 3/8"
A
B
14278 & 14478
14478-LHP
14178
8" (203 mm) Min.-
18" (457 mm) Max.
7"
(178 mm)
A
B
2"
(51 mm)
1/2"
(13 mm)
Face of plasterguard
should be flush with
finish wall line
should be flush with
finish wall line
Maximum
Allowable Deviation
Allowable Deviation
Supply
CL Supply
Lines
Lines
Dimensions
I.P.S. or C.W.T.
2 3/8" 5/8"
I.P.S. or C.W.T. with stops 5 5/16" 3/8"
A
B