Coway BA07-E User Manual



Turn on by connecting the power plug to the electrical outlet and pressing the 
power selection button on the control panel. The bidet works normally only 
when the electricity is connected.



The main water must be supplied to operate the bidet normally.



-  When there isn’t a seat sensor sensing and a button operation, if you set 

the power saving mode.

· 

After passing about 1 minute : The warm water/seat temperature 
setting becomes as a ‘Low’ status.

· 

After passing about 30 minutes : The product is switched to the power 
saving status when the indicator in the control panel is putted out.

-  In the power saving mode, the power indicator is turned off. Press any 

button to switch the product to the waiting mode and then use the bidet.

-  If the power indicator is not turned on when a button is pressed on the 

control panel, as the power is turned off, please turn on the power before use.

This product is for 120 V~  60 Hz only.

Please connect the power plug to a dedicated grounded 
electrical outlet for 120 V~  60 Hz .

Tips

1014692 BA07 »ç¿ë¼³¸í¼- ¹ÌÁÖÇâ_(08.09.10).indd   11

2008-09-10   ¿ÀÀü 11:36:38