DELL N20xx User Manual
Getting Started Guide
15
Unpacking the N20xx Switch
Package Contents
When unpacking each switch, make sure that the following items are
included:
included:
•
One Dell Networking switch
•
One RJ-45 to DB-9 female cable
•
One rack-mount kit (N20xx) for rack installation, two mounting brackets,
bolts, and cage nuts
bolts, and cage nuts
•
One set of self-adhesive rubber pads for the free-standing switch (four pads
are included)
are included)
Unpacking Steps
NOTE:
Before unpacking the switch, inspect the container and immediately report
any evidence of damage.
1
Place the container on a clean, flat surface and cut all straps securing the
container.
container.
2
Open the container or remove the container top.
3
Carefully remove the switch from the container and place it on a secure
and clean surface.
and clean surface.
4
Remove all packing material.
5
Inspect the product and accessories for damage.
Rack Mounting a N20xx Switch
WARNING:
Read the safety information in the Safety and Regulatory Information
as well as the safety information for other switches that connect to or support the
switch.
switch.
The AC power connector is on the back panel of the switch.
Installing in a Rack
WARNING:
Do not use rack mounting kits to suspend the switch from under a
table or desk, or attach it to a wall.