DELL N20xx User Manual

Getting Started Guide

27

Dell Easy Setup Wizard Console Example

The following example contains the sequence of prompts and responses 
associated with running an example Dell Easy Setup Wizard session, using 
the input values listed above.

After the switch completes the POST and is booted, the following dialog 
appears:

Unit 1 - Waiting to select management unit)>

Applying Global configuration, please wait...

Welcome to Dell Easy Setup Wizard

The Setup Wizard guides you through the initial switch 

configuration, and gets you up and running as quickly 

as possible. You can skip the setup wizard, and enter 

CLI mode to manually configure the switch. You must 

respond to the next question to run the setup wizard 

within 60 seconds, otherwise the system will continue 

with normal operation using the default system 

configuration. Note: You can exit the setup wizard at 

any point by entering [ctrl+z].

Would you like to run the setup wizard (you must 

answer this question within 60 seconds)? [Y/N] 

y

Step 1:

The system is not set up for SNMP management by 

default. To manage the switch using SNMP (required for 

Dell Network Manager) you can

.

Set up the initial SNMP version 2 account now.

.

Return later and set up other SNMP accounts. (For 

more information on setting up an SNMP version 1 or 

3 account, see the user documentation).

Would you like to set up the SNMP management interface 

now? [Y/N] 

y

To set up the SNMP management account you must specify 

the management system IP address and the “community 

string” or password that the particular management 

system uses to access the switch. The wizard