DELL N20xx User Manual

58

Getting Started Guide

To access the switch through any Management Interface 

you can

.

Set up the IP address for the Management Interface.

.

Set up the default gateway if IP address is 

manually configured on both routing and OOB interface.

Would you like to set up the Out-Of-Band interface 

now? [Y/N] 

y

Please enter the IP address of the device (A.B.C.D) or 

enter “DHCP” (without the quotes) to automatically 

request an IP address from the network DHCP server. 

[DHCP]: 

dhcp

Step 4:

Would you like to set up the VLAN1 routing interface 

now? [Y/N] 

y

Please enter the IP address of the device (A.B.C.D) or 

enter “DHCP” (without the quotes) to automatically 

request an IP address from the network DHCP server: 
10.1.1.200

Please enter the IP subnet mask (A.B.C.D or /nn): 
255.255.255.0

Step 5:

Finally, set up the default gateway. Please enter the 

IP address of the gateway from which this network is 

reachable. [0.0.0.0]: 

10.1.1.1

This is the configuration information that has been 

collected:

SNMP Interface = “public”@10.1.2.100

User Account setup = admin

Password = ********

Out-of-band IP address = DHCP

VLAN1 Router Interface IP = 10.1.1.200 255.255.255.0

Default Gateway = 10.1.1.1