Kenwood CT/KXF-W User Manual

CT-2050/203/KXF-W6010/W4010 (En/M)

Listening to cassette tape

÷ Tapes are played in the directions indicated by their respective indicators

on the display.

÷ The playback starts with the deck the play key of which is pressed.

Load cassette tapes in both decks.

Relay playback

This function plays back the tapes in both decks A and B
continuously and repeatedly.

Press stop (

7) key of the deck that is

playing.

Each press switches the indication.

1 “

[” : Relay playback of two sides of tapes in decks A and

B is repeated.

2 “

”” : Relay playback is not available with this setting.

3 “

“” : Relay playback of only one side of tapes in decks A

and B is repeated.

Each press switches the indication.

1 DOLBY NR “OFF” (extinguished): Dolby NR is not used.
2 DOLBY NR “B”: Noise reduction of the ordinary type.
3 DOLBY NR “C”: Noise reduction with higher performance.

÷ Select the Dolby NR mode according to the tape recording status.

To Stop relay playback

: Keys and control used in the operations described on this page.

Deck B: Play-
b a c k / r e c o r d i n g
available.

Deck A:
Playback only. (CT-203/
KXF-W4010 only)
Playback/recording avail-
able. (CT-2050/KXF-W6010
only)

Open the cassette holders of decks A and
B.

Insert cassette tapes and close the cas-
sette holders of decks A and B.

Determine the playback condition.

Start playback.

÷ Be sure to remove tape slack before insertion.

÷ Be sure to close the cassette holder securely by pushing it.

REV.MODE

DOLBY NR

Select the playback (recording) mode.

Select the Dolby NR mode.