Toshiba DK14 Developer's Guide

Initialization & Test

Program 91-2 – Data Transfer from Temporary Memory to Working Memory

2-8

Strata DK Programming

5/99

Program 91-2 – Data Transfer from Temporary Memory
to Working Memory

Processor Type:

DK14, DK40i, All RCTUs

Program Type:

Initialization

Initialized Default:

See individual programs

Program 91-2 Overview

Program 91-2 simulates turning system power OFF for five seconds then ON to transfer data from
temporary memory to working memory.

This power OFF / power ON sequence is required when programming with a telephone or when
using DK Admin/DK Backup. In these cases Program 03,

41-2, 50 and 76-1 data must be

transferred from temporary to working memory.

Program 91-2 does not change or erase any programmed data including directory numbers set in
Program 04 and *04 or logical/physical port assignments in Program 01 and 02.

CAUTION!

Running Program 91-2 drops all calls and renders the system inoperative for
up to eight seconds.

6SNU +ROG 6SNU

+ROG

Program Telephone Exits Program Mode and Transfers Data

Enter programming mode.
(Do not press [DN] button.)

Press LED Buttons 03 and 04.
LEDs 03 and 04 must be ON.

LCD Displays:

91 SELECT = 2

Programming
Taking Effect