Toshiba DK14 Developer's Guide
Strata DK Programming
5/99
3-1
Sys
tem
& Stati
& Stati
on
System & Station
3
This chapter gives you programming information for the Strata DK system and its stations.
Program 01 – Station Logical Port Display and/or
Change
Change
Processor Type:
DK14, DK40i, All RCTUs
Program Type:
Station
Initialized Default:
Logical port number = physical port number
Program 90, 91-1, or 91-9 initializes Program 01
Program 90, 91-1, or 91-9 initializes Program 01
Program 01 Overview
Program 01 enables you to enter a physical port to display the associated logical port. You then
have the option to assign a new logical port to the physical port. (To return ports to their initialized
settings, see Programs 90 and 91.)
have the option to assign a new logical port to the physical port. (To return ports to their initialized
settings, see Programs 90 and 91.)
Note
Record port locations on Program 04 record sheet.
6SNU +ROG 6SNU
+ROG 6SNU +ROG 6SNU +ROG
Processor
[PDN] Port Range
Processor
[PDN] Port Range
DK14
000~009
RCTUBA/BB
000~079
DK40i
000~027
RCTUC/D
000~239
RCTUA
000~031
RCTUE/F
000~335
To Save existing Logical Port
6SNU
SELECT = Physical Port Number
The logical port number associated with
the physical port displays after the
physical port number is entered.
the physical port displays after the
physical port number is entered.
Enter new Logical Port
to change existing Logical Port
to change existing Logical Port