Yamaha HTR-6180 User Manual

Rotate the R

INPUT selector to select the 

• Select “TUNER” as the input source to use the TUNER 

features in Zone 2. For details about the TUNER 
operations, see “FM/AM tuning” on page 53.

• Select “XM” as the input source to use the XM 

Satellite Radio features in Zone 2. For details about the 
XM Satellite Radio operations, see “XM Satellite 
Radio tuning” on page 59.

• Select “SIRIUS” as the input source to use the SIRIUS 

Satellite Radio features in Zone 2. For details about the 
SIRIUS Satellite Radio operations, see “SIRIUS 
Satellite Radio™ tuning” on page 64.

• Select “V-AUX” as the input source to use iPod 

features or Bluetooth features in Zone 2. For details 
about the iPod operations, see “Using iPod™” on 
page 70 or “Using Bluetooth™ components” on 
page 72.

Press H

ZONE 2 ON/OFF to set Zone 2 to the 

y
Press LSYSTEM OFF to set the main zone and Zone 2 to the 
standby mode simultaneously.

■ Setting the remote control to the Zone 2 

The remote control is originally set to the main mode to 
control the main zone. To control Zone 2 with the remote 
control, you must first set the remote control to the Zone 2 
mode.

Press 2

CODE SET using a ballpoint pen or 

The BTRANSMIT indicator on the remote control 
flashes twice.

Press the numeric buttons (6) to enter the 
code number “9992”.

■ Controlling Zone 2 with the remote 

Press and hold D

POWER or CSTANDBY and 

then press 4

• Press DPOWER when the main zone is turned on.
• Press CSTANDBY when the main zone is turned off.

The BTRANSMIT indicator on the remote control lights 
up while the remote control is set to the Zone 2 mode.

• When the remote control is set to the Zone 2 mode, 

DPOWER, CSTANDBY, EVOLUME +/–, GMUTE, and 
the input selector buttons (4) are set to control Zone 2. 
However, the rest of the remote control buttons remain in the 
main mode.

• The remote control automatically exits from the Zone 2 mode in 

the following cases:
– when you do not make any operations within 10 seconds after 

the remote control is set to the Zone 2 mode.

– when you press a remote control button other than 

DPOWER, CSTANDBY, EVOLUME +/–, GMUTE, the 
ASCENE buttons and the input selector buttons (4).

Press D

POWER to turn on Zone 2.

Press one of the input selector buttons (4) to 
select the desired input source of Zone 2.

Press C

STANDBY to set Zone 2 to the standby 

Operate the following operations after activating the Zone 2 
operation mode.