Yamaha HTR-6180 User Manual

■ HDMI signal compatibility

y
• If the input source component can decode the bitstream audio 

signals of audio commentaries, you can play back the audio 
sources with the audio commentaries mixed down by using the 
following connections:
– multi-channel analog audio input (see page 25)
– DIGITAL INPUT OPTICAL (or COAXIAL)

• Refer to the supplied instruction manuals of the input source 

component, and set the component appropriately.

• When CPPM copy-protected DVD-Audio is played back, video 

and audio signals may not be output depending on the type of 
the DVD player.

• This unit is not compatible with HDCP-incompatible HDMI or 

DVI components.

• To decode audio bitstream signals on this unit, set the input 

source component appropriately so that the component outputs 
the bitstream audio signals directly (does not decode the 
bitstream signals on the component). Refer to the supplied 
instruction manuals for details.

• This unit is not compatible with the audio commentary features 

(for example, the special audio contents downloaded via Internet) 
of Blu-ray Disc or HD DVD. This unit does not play back the 
audio commentaries of the Blu-ray Disc or HD DVD contents. 

Video signals
This unit is compatible with the video signals of the 
following resolutions:

– 480i/60 Hz
– 576i/50 Hz
– 480p/60 Hz
– 576p/50 Hz
– 720p/60 Hz, 50 Hz
– 1080i/60 Hz, 50 Hz
– 1080p/60 Hz, 50 Hz, 24 Hz

■ HDMI jack and cable plug

y
• We recommend that you use an HDMI cable shorter than 5 

meters (16 feet) with the HDMI logo printed on it.

• Use a conversion cable (HDMI jack 

↔ DVI-D jack) to connect 

this unit to other DVI components.

• Do not disconnect or connect the cable or turn off the power of 

the HDMI components connected to the HDMI OUT jack of 
this unit while data is being transferred. Doing so may disrupt 
playback or cause noise.

• If you turn off the power of the video monitor connected to the 

HDMI OUT jack via a DVI connection, this unit may fail to 
establish the connection to the component.

• The analog video signals input at the composite video, S-video 

and component video jacks can be digitally up-converted to be 
output at the HDMI OUT jack. Set “VIDEO CONV.” to “ON” 
in “MANUAL SETUP” (see page 98) to activate this feature.

2ch Linear 
PCM

2ch, 32-192 kHz, 
16/20/24 bit

CD, DVD-Video, 
DVD-Audio, etc.

Multi-ch 
Linear PCM

8ch, 32-192 kHz, 
16/20/24 bit

DVD-Audio, Blu-
ray Disc, HD DVD, 
etc.

DSD

2/5.1ch, 
2.8224 MHz, 1 bit

SA-CD, etc.

Bitstream

Dolby Digital, 
DTS

DVD-Video, etc.

Bitstream (High 
definition audio)

Dolby TrueHD, 
Dolby Digital Plus, 
DTS-HD Master 
Audio, DTS-HD High 
Resolution Audio, 
DTS Express

Blu-ray Disc,
HD DVD, etc.

IN1

DVD

IN2

DTV/CBL

IN3

DVR