Yamaha HTR-6180 User Manual

D SP A B indicators
Light up according to the set of front speakers activated 
(see page 43).
SP A:

The FRONT A speakers are activated.

SP B:

The FRONT B speakers are activated.

SP A B: The FRONT A and FRONT B speakers are 

activated.

E ZONE2 indicator
Lights up when Zone 2 is turned on (see page 107).

F DSP indicators
The respective indicator lights up when any of the sound 
field programs are selected (see page 48).

CINEMA DSP indicator
Lights up when you select a CINEMA DSP sound 
field program (see page 48).

VIRTUAL indicator
Lights up when the Virtual CINEMA DSP mode is 
active (see page 51).

SILENT CINEMA indicator
Lights up when headphones are connected and a 
sound field program is selected (see page 51).

G Multi-information display
Shows the name of the current sound field program and 
other information when adjusting or changing settings.

H SLEEP indicator
Lights up while the sleep timer is on (see page 47).

I Input channel and speaker indicators

• Indicate the channel components of the current 

digital input signal.

• Light up or flash according to the settings of the 

speakers when this unit is in the automatic setup 
procedure (see page 32) or in the “BASIC MENU” 
in “MANUAL SETUP” (see page 89).

Presence speaker indicators
Light up or flash according to the setting of “EXTRA 
SP ASSIGN” when this unit is in the automatic setup 
procedure (see page 32) or in the “BASIC MENU” in 
“MANUAL SETUP” (see page 87).

y
You can make settings for the presence and surround back 
speakers automatically by running “AUTO SETUP” (see 
page 32) or manually by adjusting settings for “SUR.B L/R 
SP” (see page 88) in “SPEAKER SET”. 

The remote control transmits a directional infrared ray.
Be sure to aim the remote control directly at the remote 
control sensor on this unit during operation.

Infrared window (1)
Outputs infrared control signals. Aim this window at the 
component you want to operate.

B

TRANSMIT indicator

Flashes while the remote control is sending infrared 
signals.

Operation mode selector (F)
The function of some buttons depends on the operation 
mode selector position.

AMP
Operates the amplifier function of this unit.

SOURCE
Operates the component selected with an input 
selector button (see page 103).

TV
Operates the TV assigned to either 4DTV/CBL or 
4PHONO (see page 102).

• Do not spill water or other liquids on the remote control.
• Do not drop the remote control.
• Do not leave or store the remote control in the following types 

of conditions:
– places of high humidity, such as near a bath
– places of high temperatures, such as near a heater or stove
– places of extremely low temperatures
– dusty places

• To set the remote control codes for other components, see 

Input channel indicators

LFE indicator

Presence speaker indicators

30 

30