Yamaha HTR-6180 User Manual
36
En
Optimizing the speaker setting for your listening room (YPAO)
15
Press 8
ENTER to confirm your selection.
The top “SET MENU” screen appears in the OSD.
16
Press I
SET MENU to exit from “SET
MENU”.
y
If you change speakers, speaker positions, or the layout of your
listening environment, run “AUTO SETUP” again to recalibrate
your system.
If you change speakers, speaker positions, or the layout of your
listening environment, run “AUTO SETUP” again to recalibrate
your system.
■ If an error screen appears
Press 8k / n / l / h to select “RETRY” or
“EXIT” and then press 8
“EXIT” and then press 8
ENTER.
The following display is an example when “E-9:USER
CANCEL” appears in the OSD.
CANCEL” appears in the OSD.
Choices: RETRY, EXIT
• Select “RETRY” to retry the “AUTO SETUP”
• Select “RETRY” to retry the “AUTO SETUP”
procedure.
• Select “EXIT” to exit from the “AUTO SETUP”
procedure.
y
If “E-5:NOISY” appears, “PROCEED” also appears in the
choices. When you select “PROCEED”, this unit continues the
measurements and settings, but the settings may not be optimal.
If “E-5:NOISY” appears, “PROCEED” also appears in the
choices. When you select “PROCEED”, this unit continues the
measurements and settings, but the settings may not be optimal.
■ If “WARNING” appears
When this unit detects potential problems during the
“AUTO SETUP” procedure, “WARNING” appears in the
top result display. Check the warning messages to correct
your speaker settings.
“AUTO SETUP” procedure, “WARNING” appears in the
top result display. Check the warning messages to correct
your speaker settings.
Warnings differ from errors in that warnings do not cancel the
“AUTO SETUP” procedure.
“AUTO SETUP” procedure.
1
Make sure the pointer is pointing at
“WARNING” and then press 8
“WARNING” and then press 8
ENTER to
display the detailed information about the
warning.
The number on the right of “WARNING” indicates
the number of warning messages.
warning.
The number on the right of “WARNING” indicates
the number of warning messages.
2
Press 8l / h repeatedly to toggle between
the warning displays.
the warning displays.
y
• For details about each warning message, see the “AUTO
• For details about each warning message, see the “AUTO
• When the corresponding warning message is not
applicable to a speaker, “––” is displayed instead.
• If “SWFR: TOO LOUD” or “SWFR: TOO LOW” appears
in the “W-3: LEVEL ERROR” display, adjust the volume
level of the subwoofer(s).
level of the subwoofer(s).
3
Press 8
ENTER to return to the top result
display.
SET MENU
. ;AUTO SETUP
;MANUAL SETUP
.A;SIGNAL INFO
[ ]/[ ]:Up/Down
[ENTER]:Enter
[ENTER]:Enter
p
p
ERROR
. E-9:USER CANCEL
Don't operate
any function
>RETRY
EXIT
[ ]/[ ]:Select
[ENTER]:Enter
[ENTER]:Enter
[
[
Note
AUTOSETUP
RESULT
. WARNING(3)
>SET
CANCEL
[ ]/[ ]:Up/Down
[ENTER]:Detail
[ENTER]:Detail
SP
:
3/4/0.1
DIST: 14.0/17.0ft
LVL : -9.0/+6.5dB
LVL : -9.0/+6.5dB
WARNING
W-1:OUTOFPHASE
Reverse Channel
FL
Reverse Channel
FL
--
CENTER
PL
PL
PR
SL
SR
SBL
SBR
[ ]/[ ]:Select
[ENTER]:Return
[ENTER]:Return
[
[