Yamaha HTR-6180 User Manual

■ Controlling the input source 

You can operate both this unit and the input source 
component by using the remote control. You must set the 
appropriate remote control code for each input source in 
advance (see page 104).

Press the desired A

SCENE button on the 

*

These buttons control the input source component. See 
page 103 for details of the function of each button.

■ Setting the input source of the 

If you customize the input source of the selected SCENE 
template, you must set the input source of the SCENE 
template on the remote control to operate the input source 
component correctly.

Press the desired A

SCENE button on the 

Press and hold the A

SCENE button and the 

desired input selector button (4).

The BTRANSMIT indicator flashes twice.

Keep holding down the buttons pressed in 
step 2 until the B

TRANSMIT indicator 

If the setting of the input source is not successful, the 
BTRANSMIT indicator flashes repeatedly. In this case, repeat 
the setup procedure.

Before performing the following operations, set the operation 
mode selector on the remote control to FSOURCE.

*