Yamaha HTR-6180 User Manual

Press 8k / n repeatedly to select “SIRIUS” 
and then press 8

ENTER.

The following menu screen appears.

Press 8n repeatedly to select “PARENTAL 
LOCK” and then press 8

ENTER.

“NEW PIN:0000” appears.

If a SiriusConnect tuner is not connected to this unit, “Not 
Available” appears.

y
If the Parental Lock code number is already set, “PIN:___” 
appears instead of “NEW PIN:0000”. Refer to step 8 and 
then proceed the operations.

Enter the desired 4-digit code number by 
using the numeric buttons (6).

y
Press 9RETURN to return the previous menu level 
without setting the code number.

Press 8

ENTER to confirm the code number.

“OK” and then the SIRIUS Satellite Radio channel 
list appears. Refer to the step 9 and then proceed the 
operations.

Enter the 4-digit code number you set at step 
6 above to unlock the protection.
When the code number is correct, “OK” and then the 
SIRIUS Satellite Radio channel list appears.

Press 8l / h repeatedly to select the 
desired channel category and then press 
8k / n repeatedly to select the channel you 
want to lock.

In the SIRIUS Satellite Radio channel list screen, this unit 
outputs the sound of the selected channel even if the channel 
is locked. Only the first eight characters of each channel 
name are displayed in the list.

Press 8

ENTER to lock the selected 

channel.
Check mark appears before the locked channel.

y
When you select the locked channel and press 8ENTER, 
this unit unlocks the selected channel.

Repeat steps 9 and 10 to lock the channels 
you want.

Press 9

RETURN to exit from the 

Press I

SET MENU to exit from the setup 

menu.
This unit is tuned into the last channel you select in 
the “PARENTAL LOCK” screen. If the channel is 
locked, this unit is tuned into “184 SIRIUS Weather 
& Emergency” or “000 Sirius IDxxxxxxxxxxxx” 
(“xxxxxxxxxxxx” indicates the Sirius ID of your 
SiriusConnect tuner).

y
• If you forget or want to change the Parental lock code number, 

use “SR PIN” in “ADVANCED SETUP” to reset the Parental 
Lock code number.

• When you select “ALL” in “INIT” (see page 112), all locked 

channels are unlocked.

■ Tuning into the locked channels

You can tune into the locked channels by the Direct 
number access mode or preset tuning mode. When you 
tune into the locked channel, following message appears 
in the front panel display. Enter the code number you set 
for the Parental Lock feature by using the numeric buttons 
(6) or press HENT to cancel the tuning.

 

• If the entered code number is incorrect, “Wrong” appears in the 

front panel display and this unit is tuned into the previously 
selected channel.

• If a channel is unlocked, you can also select the channel in 

Zone2. 

A)

SIRIUS

. INPUTRENAME

VOL. TRIM

;;;;;0.0dB

PARENTAL LOCK

[ ]/[ ]:Up/Down
[ENTER]:Enter

[

p

PARENTAL LOCK

NEWPIN:0000

[0] [9]:NUMBER

[ENT]:Enter

-

PIN:____