Yamaha HTR-6180 User Manual

■ Low-frequency effect level 

B)LFE LEVEL

Use this feature to adjust the output level of the LFE (low-
frequency effect) channel according to the capacity of 
your subwoofer or headphones. The LFE channel carries 
low-frequency special effects which are only added to 
certain scenes. This setting is effective when the input 
signal contains the LFE channel.
Control range: –20 to 0 dB
Control step: 1 dB

SPEAKER

Adjusts the speaker LFE level.

HEADPHONE

Adjusts the headphone LFE level.

Depending on the settings of “LFE/BASS OUT” (see page 87), 
some signals may not be output at the SUBWOOFER PRE OUT 
jack.

■ Dynamic range

C)DYNAMIC RANGE

Use this feature to select the amount of dynamic range 
compression to be applied to your speakers or 
headphones. This setting is effective only when this unit is 
decoding bitstream signals.

SPEAKER

Adjusts the dynamic range compression for the speakers.

HEADPHONE

Adjusts the dynamic range compression for the 
headphones.

[]/[]:
[

p]/[[]:

[

p

B)LFE LEVEL

SPEAKER;;;;;;0dB

HEADPHONE;;;;0dB

Up/Down

Adjust

.

MIN/AUTO

• MIN: Adjusts the dynamic range to narrow 

when this unit is decoding bitstream signals 
(except Dolby TrueHD).

• AUTO: Adjusts the dynamic range according 

to the instruction of the input source signals 
when this unit is decoding Dolby TrueHD 
signals.

STD

Adjusts the dynamic range to medium. When 
this unit is decoding Dolby TrueHD signals, the 
dynamic range control is always active 
regardless of the instruction of the input source 
signals.

Preserves the greatest amount of dynamic range.

[]/[]:
[

p]/[[]:

[

p

C)DYNAMIC RANGE

SPEAKER;;;;;;;;;MAX

HEADPHONE;;;;;;;MAX

Up/Down

Select

.