Yamaha R-S300BL User Manual

You can use the automatic station preset function to 
automatically register FM stations as presets. This 
function enables this unit to automatically tune in to FM 
stations that have a strong signal and store up to 40 of 
those stations in order. You can then easily recall any 
preset station by selecting its preset number.

• If a station is registered to a preset number that already has a 

station registered to it, the previously registered station is 
overwritten.

• If the station you want to store is weak in signal strength, try 

using the manual preset tuning method.

y

FM stations registered as presets using the automatic preset 
registration feature will be heard in stereo.

If you press FM on the remote control to select TUNER as the 
input source, the corresponding band is also selected, therefore 
you may skip step 2.

Press FM on the front panel (or FM on the 
remote control) to select FM as the reception 
band.
FM is displayed on the front panel display.

Press OPTION on the remote control.
The Option menu for TUNER is displayed (see page 
29).

Press B / C on the remote control to select 
“Auto Preset”, and then press ENTER.

This unit starts scanning the FM band about 5 
seconds later from the lowest frequency upwards.

y

• Before scanning begins, you can specify the first preset number 

to be used by pressing PRESET j / i on the front panel (or 
PRESET j / i or B/C on the remote control).

• To cancel scanning, press FM or AM on the front panel (or FM 

or AM or RETURN on the remote control).

When presets are registered, information is displayed 
on the front panel display as shown in the illustration 
above.
When scanning is complete, “FINISH” is displayed 
and then the display returns to the Option menu.
To return the display to the original state, press 
OPTION or RETURN on the remote control.

PRESET j / i 

PRESET j / i 

B / C 
ENTER