Yamaha pmn User Manual
E-
8
CONTROLS AND FUNCTIONS
Remote control
1
Sending eye
Outputs infrared (IR) remote control signals. Aim this at the
component you want to operate.
component you want to operate.
2
CONTRAST +/–
Adjust the contrast of the display.
3
BACKLIGHT
Turns the backlight on.
4
Direct-access buttons
• POWER:
Turns on the power of this unit.
• STANDBY: Sets this unit in the standby mode.
• MUTE:
Mutes the sound. While the mute function is on,
“MUTE ON” appears on the front panel display.
“MUTE ON” appears on the front panel display.
• VOL +/–:
Increases or decreases the volume level.
5
Touch screen
6
Left/right buttons
Depending on the components the remote control is operating, these
buttons change function. The current function is displayed on the
touch screen right above the button.
buttons change function. The current function is displayed on the
touch screen right above the button.
7
Learning eye
Receives RC codes from existing remote controls.
8
I/O (Serial port)
See page __ for information.
9
Battery door
0
RESET
See page __ for information.
4
2
3
3
1
5
6
7
9
0
8
1
8
7
6
5
4
2
3
1
Home
To go to the Home menu.
2
Remote control icon
Touch and hold to enter Setup.
3
Device menu
To open control panel of components.
4
Panel number
Shows active control panel.
5
Mode menu
To customize the remote control.
6
Control panel
To send commands to components.
7
Scroll buttons
To display previous/next control panel.
8
Macro menu
To open stored list of commands.
■ Display on the touch screen