Yamaha pmn User Manual

■ 1C REAR L/R SP (rear speaker mode)

The OSD shows large, small, or no rear speakers depending on how you set this item. The initial setting is “LRG”.

Select the “LRG” setting if you have large left and right rear speakers or if you use a rear subwoofer. The entire range of rear
channel signals is sent to the left and right rear speakers.

Select the “SML” setting if you have small left and right rear speakers. Rear channel low frequency signals of 90 Hz and below
are directed to the speakers selected with the “1E LFE/BASS OUT” item.

Select the “NONE” setting if you do not have rear speakers. All of the rear channel signals are directed to the left and right main
speakers.

• This unit is set in the virtual CINEMA DSP mode by selecting “NONE” for “1C REAR L/R SP” while the sound effect is on.

• In this case, the rear center speaker will automatically be set to “NONE” and the “1D REAR CT SP” item will be skipped.

■ 1D REAR CT SP (rear center speaker mode)

By adding a rear center speaker to your speaker configuration, this unit can provide more realistic front-to-back and back-to-front transitions.
The initial setting is “LRG”.

Select the “LRG” setting if you have a large rear center speaker. The entire range of rear center channel signals is sent to the rear
center speakers.

Select the “SML” (small) setting if you have a small rear center speaker. Rear center channel low frequency signals of 90 Hz and
below are distributed to speakers selected with the “1E LFE/BASS OUT” item.

Select the “NONE” setting if you do not have a rear center speaker. The rear center signal is directed to the rear L/R speakers.

• If “1C REAR L/R SP” is set to “NONE”, “1D REAR CT SP” will be skipped from the SET MENU and the setting cannot be changed.

“LRG

SML

NONE

1C REAR L/R SP

LRG “SML

NONE

1C REAR L/R SP

LRG

SML “NONE

1C REAR L/R SP

“LRG

SML

NONE

1D REAR CT SP

LRG “SML

NONE

1D REAR CT SP

LRG

SML “NONE

1D REAR CT SP