Yamaha pmn User Manual
E-
50
BASIC PLAYBACK
■ Playing the Dolby Digital EX or DTS ES
software
Tap
on the RECEIVER control panel to open the DSP
control panel. Then tap
to turn on the Dolby Digital EX or
DTS ES decoder to listen to the Dolby Digital EX and DTS ES
software with a rear center speaker.
The display changes AUTO ^ Discrete 6.1 ^ Matrix 6.1 ^ OFF
each time
software with a rear center speaker.
The display changes AUTO ^ Discrete 6.1 ^ Matrix 6.1 ^ OFF
each time
is tapped.
AUTO: This mode automatically switches Dolby Digital EX/DTS
ES Matrix 6.1/DTS ES Discrete 6.1 depending on the signal in the
input source that this unit can detect. Rear center speaker does not
work for 5.1 channel sources.
ES Matrix 6.1/DTS ES Discrete 6.1 depending on the signal in the
input source that this unit can detect. Rear center speaker does not
work for 5.1 channel sources.
Discrete 6.1: This mode can be selected when the source with
DTS ES Discrete format has been detected. (The “DISCRETE”
indicator lights up.)
DTS ES Discrete format has been detected. (The “DISCRETE”
indicator lights up.)
Matrix 6.1: This mode makes 6-channel playback of the input
source with Matrix or Matrix compatible format through the Matrix
6.1 decoder. (The “MATRIX” indicator lights up.)
source with Matrix or Matrix compatible format through the Matrix
6.1 decoder. (The “MATRIX” indicator lights up.)
OFF: Rear center speaker does not work in this mode.
Cautions
• Some 6.1-channel compatible discs do not have the signal (flag)
which this unit can automatically detect. When playing this kind
of discs with 6.1 channel, select “Matrix 6.1”.
of discs with 6.1 channel, select “Matrix 6.1”.
• 6.1-channel playback is not possible even if
is tapped in the
following cases:
1 when “1C REAR L/R SP” is set to “NONE”
2 when the sound effect is turned off
3 when the source connected to the 6CH INPUT jack is being
2 when the sound effect is turned off
3 when the source connected to the 6CH INPUT jack is being
played
4 when Dolby Digital KARAOKE source is being played
D–TV/LD
DVD
CABLE
MD/TAPE
SAT
CD–R
VCR 1
TUNER
VCR 2
CD
VCR3/DVR
PHONO
V–AUX
DISCRETE
DSP
EX/ES
AUTO:Disc 6.1
VOLUME
LFE
L
C
R
RL
SP
A
RC RR
MATRIX
MATRIX/DISCRETE indicator
■ Selecting PRO LOGIC, PRO LOGIC or Neo: 6
You can enjoy the 2-channel sources decoded into five or six
discrete channels by selecting PRO LOGIC, PRO LOGIC or Neo:
6 in the program No. 12.
discrete channels by selecting PRO LOGIC, PRO LOGIC or Neo:
6 in the program No. 12.
1
1
Select a 2-channel source and start playback on the
source component.
source component.
2
2
Select the decoder.
Tap
Tap
or
on the DSP control panel repeatedly to open the
third DSP control panel (page 5/8). Then tap
or
repeatedly to select the decoder; PRO LOGIC, PRO
LOGIC , and Neo: 6.
The decoder selection switches among PRO LOGIC, PRO
LOGIC and Neo: 6 on the front panel display.
The decoder selection switches among PRO LOGIC, PRO
LOGIC and Neo: 6 on the front panel display.
Cautions
• Playback using DOLBY PRO LOGIC and DTS Neo: 6 decoders
is possible only for 2-channel signals.
• PROGRAM q/w on the front panel can be also used to select
these programs.
DOLBY PRO LOGIC decoder
PROLO
GIC
Normal
PROLO
GIC
Enhanced
PROLO
GIC
Movie
PROLO
GIC
Music
Neo:6
Cinema
Neo:6
Music
DOLBY PRO LOGIC
decoder
decoder
DTS Neo: 6 decoder