Yamaha pmn User Manual
E-
82
REMOTE CONTROL FEATURES
Adding and moving
■ Adding a component
If you have a component that is not listed in the Device menu, you
can add it to the remote control.
You cannot add components to the Home menu directly. You must
add them via the Device menu.
can add it to the remote control.
You cannot add components to the Home menu directly. You must
add them via the Device menu.
1
1
Make sure the device tab is active.
The device tab is active when the name of a component is
displayed.
The device tab is active when the name of a component is
displayed.
2
2
Switch to the Add mode via
at the bottom of the
touch screen.
The remote control displays the following choices:
The remote control displays the following choices:
•
: Choose this option to add a completely
new component.
•
: Choose this option to copy a component
already listed in the Device menu (for example for a second
DVD).
DVD).
•
: Use this option to restore a component
you have deleted.
3
3
Tap the component you want to add in the Device
menu.
menu.
Note
• If the component you want to add is not listed, choose a
similar one. You can customize it later.
The remote control allows you to add new components with or
without RC codes.
without RC codes.
•
: Choose this option if you think the new
component understands RC codes. The new component is
added with operational buttons.
added with operational buttons.
•
: If you choose this option, the new
component is added without operational buttons. You will
then have to program them as explained in “Learning control
panel buttons”.
then have to program them as explained in “Learning control
panel buttons”.
You cannot define a component in the Brand mode, because
there are no RC codes available.
there are no RC codes available.
4
4
Tap the button of your choice.
The new component is automatically displayed in the Use
mode.
The new component is automatically displayed in the Use
mode.
Note
• A new device tab is automatically created in the Device menu and
in the third Home menu panel. However, you cannot add the
button of the new component to the audio/visual source panels.
button of the new component to the audio/visual source panels.
■ Moving a component, macro group or timer
group
You can change the order in the Device menu and the Macro menu.
Changes you make in the Device menu are automatically updated in
the Home menu.
Changes you make in the Device menu are automatically updated in
the Home menu.
1
1
Make sure the device tab or macro tab is active.
The device or macro tab is active when the name of a compo-
nent, macro or timer is displayed.
The device or macro tab is active when the name of a compo-
nent, macro or timer is displayed.
2
2
Switch to the Move mode via
at the bottom of the
touch screen.
The remote control displays the menu.
The remote control displays the menu.
3
3
Tap the component or group you want to move.
The menu item is highlighted.
The menu item is highlighted.
4
4
Use the left and right button to move the menu item
up or down.
up or down.
5
5
Tap
to save the changes.
You return to the Use mode.
Note
• The item at the top of the device tab corresponds to
on the
first Home menu panel. If you move the RECEIVER tab down, it
is advisable to label
is advisable to label
with the name of the item at the top of
the Device menu.