Yamaha pmn User Manual
E-
87
AD
V
ANCED
OPERA
TION
English
REMOTE CONTROL FEATURES
Setting timers
With a timer you can activate a component at the time you determine.
■ Setting timers
To activate a component at a desired time, you can use the timer.
1
1
Tap
.
2
2
Open the Macro menu and select a timer group.
3
3
Switch to the Edit mode via
at the bottom of the
touch screen.
Empty timer buttons appear in the TIMER control panel.
Empty timer buttons appear in the TIMER control panel.
4
4
Tap the button for which you want to set a timer.
The first TIMER control panel appears, enabling you to set the
start time.
The first TIMER control panel appears, enabling you to set the
start time.
5
5
Enter the command the timer should execute and tap
.
A timer can contain either a single IR command or a macro.
You can navigate to any control panel you want, just as you do
in the Use mode.
You can navigate to any control panel you want, just as you do
in the Use mode.
6
6
Tap the clock button and set the start time using the
left/right buttons.
left/right buttons.
7
7
Tap one or more day buttons to select or deselect
days for the timer.
You can choose to repeat the timer weekly.
days for the timer.
You can choose to repeat the timer weekly.
8
8
Scroll down to display the second TIMER control
panel, in which you can set the stop time.
panel, in which you can set the stop time.
9
9
Enter the command the timer should execute and tap
.
10
10
Set the stop time and select the days following the
same procedure described in steps 6 and 7.
same procedure described in steps 6 and 7.
11
11
Tap the clock button to deselect it and press the left
button (labeled “CLOSE”) to close the timer.
A confirmation screen appears, enabling you to save or cancel
the timer.
button (labeled “CLOSE”) to close the timer.
A confirmation screen appears, enabling you to save or cancel
the timer.
12
12
Tap
.
The timer is activated.
Note
• The timer works only when the remote control’s sending eye is
pointed at the controlled component and no obstructions interfere
with the IR signal.
with the IR signal.
■ Editing timers
You can edit any timer you have set.
1
1
Open the timer group that contains the timer.
2
2
Switch to the Edit mode via
at the bottom of the
touch screen.
3
3
Tap the timer you want to edit.
The contents of the timer appear.
The contents of the timer appear.
4
4
Edit the timer.
5
5
Press the left button to close the timer.
A confirmation screen appears, enabling you save or cancel the
timer.
A confirmation screen appears, enabling you save or cancel the
timer.
6
6
Tap
.
The timer is edited.
■ Organizing timers into groups
You can create as many timer groups as you like. Each group can
contain up to 25 timers.
contain up to 25 timers.
1
1
Open any timer group.
2
2
Switch to the Add mode via
at the bottom of the
touch screen.
You can create a new group, copy an existing group, or restore
a previously-deleted group.
You can create a new group, copy an existing group, or restore
a previously-deleted group.
•
: You add a new group in which you can
record new macros.
•
: You copy a group and its macros and use
the copy to create new macros.
•
: You restore a deleted group and reuse the
macros.
3
3
Tap
.
You see a touch screen on which you can create and edit timer
groups. The new group is added to the Macro menu.
groups. The new group is added to the Macro menu.