Yamaha RX-SL100RDS User Manual

■

Use to adjust the brightness of the front panel display.
Choices: –4 to 

■

Use this feature to prevent accidental changes to DSP 
program parameter values and other system settings.
OPTION menu > Memory Guard

Choices: 

, ON

Select ON to protect:
• DSP program parameters
• All SET MENU items
• All speaker levels
When Memory Guard is set to ON, you cannot use the test 
tone or select any other SET MENU items.

■

Use this feature to adjust how much the mute function 
reduces the output volume.
OPTION menu > Audio Mute

Choices: –20 dB, –50 dB, –m dB
• Select –20 dB to reduce the current volume by 20 dB.
• Select –50 dB to reduce the current volume by 50 dB.
• Select  –m dB to completely halt all output of sound.

■

Use this feature to adjust the frequency spacing for the 
tuner. The new setting becomes active the next time the 
power is turned on.
OPTION menu > TUNER Freq/Step

Choices: AM: 9kHz, FM: 50kHz and AM: 10kHz, 

FM: 100kHz

• Select AM: 9kHz, FM: 50kHz to set the AM band to 

9kHz and the FM band to 50kHz.

• Select AM: 10kHz, FM: 100kHz to set the AM band to 

10kHz and the FM band to 100kHz.

This feature is only available when using Asia and General 
models.

■

Use this feature to select whether you want signals carried 
via SCART connections to pass through this unit when it 
is set to the standby mode.
OPTION menu > Standby SCART

Choices: 

, OFF

• Select ON if you want to allow signals to pass through 

this unit when it is in standby mode. (For example, if 
this unit is connected via its SCART connectors 
between your TV and VCR, the TV signals can pass 
through to the VCR even when this unit is in the 
standby mode.)

• Select OFF if you do not want signals to pass through 

this unit when it is in standby mode.

∞ 

01EN.00_RX-SL100RDS.book  Page 45  Thursday, November 27, 2003  12:42 PM