Yamaha RX-N600 User Manual

■

This unit has three types of audio jacks. Connection 
depends on the availability of audio jacks on your other 
components.

For conventional analog audio signals transmitted via left 
and right analog audio cables. Connect red plugs to the 
right jacks and white plugs to the left jacks.

For digital audio signals transmitted via coaxial digital 
audio cables.

For digital audio signals transmitted via optical digital 
audio cables.

• You can use the digital jacks to input PCM, Dolby Digital and 

DTS bitstreams. When you connect components to both the 
COAXIAL and OPTICAL jacks, priority is given to the signals 
input at the COAXIAL jack. All digital input jacks are 
compatible with 96-kHz sampling digital signals.

• Pull out the cap from the optical jack before you connect the 

fiber optic cable. Do not discard the cap. When you are not 
using the optical jack, be sure to put the cap back in place. This 
cap protects the jack from dust.

■

This unit has three types of video jacks. Connection 
depends on the availability of input jacks on your video 
monitor.

For conventional composite video signals transmitted via 
composite video cables.

For S-video signals, separated into the luminance (Y) and 
chrominance (C) video signals transmitted on separate 
wires of S-video cables.

For component video signals, separated into the 
luminance (Y) and chrominance (P

B

, P

R

) video signals 

transmitted on separate wires of component video cables.

y

When “VIDEO CONV.” is set to “ON” (see page 86), the video 
signals input at the VIDEO and S VIDEO jacks are converted and 
output at the VIDEO, S VIDEO and COMPONENT VIDEO 
jacks interchangeably.

P

B

Y

P

R

S

V

R

L

C

O

R

L

(Red)

(White)

(Orange)

(Yellow)

(Green)

(Blue)

(Red)