Yamaha RX-N600 User Manual

You can display the operating information of this unit on a 
video monitor. If you display the “SET MENU” and sound 
field program parameter settings on a video monitor, it is 
much easier to see the available options and parameters 
than it is to read the information in the front panel display.

The OSD mode changes in the following order.

Fully shows the sound field program parameter 
settings as well as the contents of the front panel 
display.

Briefly shows the contents of the front panel display 
at the bottom of the screen each time you operate this 
unit.

No information is displayed except for the “SET 
MENU” screen.

y

You can display a gray background in the OSD when there is not 
video signal being input by setting “GRAY BACK” in “OPTION 
MENU” to “AUTO” (see page 87).

• The OSD signal is not output at the DVR OUT jacks and will 

not be recorded.

• You must set “VIDEO CONV.” in “OPTION MENU” to “ON” 

(see page 86) to display the OSD.

• To display the OSD with the component video signals output at 

the COMPONENT VIDEO MONITOR OUT jacks, set the 
OSD mode to the full display mode.

• When “GRAY BACK” in “OPTION MENU” is set to “OFF” 

(see page 87), the OSD may not be displayed correctly 
depending on the conditions of the picture.

You can combine a video image from a video source with 
sound from an audio source. For example, you can enjoy 
listening to classical music while viewing beautiful 
scenery from the video source on the video monitor.

y

If you want to enjoy an audio source input at the MULTI CH 
INPUT jacks together with a video source, first select the video 
source and then press MULTI CH INPUT on the front panel (or 
MULTI CH IN on the remote control) to select the component 
connected to the MULTI CH INPUT jacks as the input source 
(see page 38).

P02

MUSIC

.

Pop/Rock

DSP LEVEL

;;;;0dB

P.INIT.DLY

;;21ms

P.ROOM SIZE

;;1.0

S.INIT.DLY

;;25ms

S.ROOM SIZE

;;1.0

P02

MUSIC

Pop/Rock