Yamaha RX-N600 User Manual

  OSD SHIFT

Use this feature to adjust the vertical position of the OSD.
Control range: –5 (upward) to +5 (downward)
Control step: 1
Initial setting: 0
• Press j to raise the position of the OSD.
• Press i to lower the position of the OSD.

  GRAY BACK

Use this feature to display a gray background in the OSD 
when there is no video signal being input.
Choices: 

, OFF

• Select “AUTO” to display a gray background in the 

OSD when there is no video signal being input.

• Select “OFF” not to display any background in the 

OSD.

• Depending on the video signals being input or the system 

setting of your video monitor (NTSC or PAL), the OSD may be 
displayed abnormally. In such cases, set “GRAY BACK” to 
“OFF”.

• Even when “GRAY BACK” is set to “OFF”, the OSD may not 

be displayed correctly depending on the conditions of the 
picture.

  ON SCREEN

Use this feature to set the amount of time to display the 
XM Satellite Radio information, iPod menu or NET/USB 
menu in the OSD after you perform a certain operation.
Choices: ON, 

, 30s

• Select “ON” to display the OSD unceasingly during an 

operation.

• Select “10s” to turn off the OSD 10 seconds after you 

perform a certain operation.

• Select “30s” to turn off the OSD 30 seconds after you 

perform a certain operation.

  FL SCROLL

Use this feature to set whether to display the information 
(such as song title or channel name) in the front panel 
display in a continuous manner or by the first 14 
alphanumeric characters after scrolling all characters once 
when “XM”, “DOCK” or “NET/USB” is selected as the 
input source.
Choices: 

, ONCE

• Select “CONT” to display the operation status in the 

front panel display in a continuous manner.

• Select “ONCE” to display the operation status in the 

front panel display by the first 14 alphanumeric 
characters after scrolling all characters once.

■

B)MEMORY GUARD

Use this feature to prevent accidental changes to DSP 
program parameter values and other system settings.
Choices: 

, ON

• Select “OFF” to turn off the “MEMORY GUARD” 

feature.

• Select “ON” to protect:

– DSP program parameters
– all “SET MENU” items
– all speaker levels

When “MEMORY GUARD” is set to “ON”, you cannot select 
and adjust any other “SET MENU” items.

>OFFON

[<]/[>]:Select
[ENTER]:Return

B)MEMORY

GUARD