Yamaha RX-V561 User Manual

MAX VOL.

Use this feature to set the maximum volume level. This 
feature is useful to avoid the unexpected loud sound by 
mistake. For example, the original volume range is 16 dB 
to –80 dB. However, when “MAX VOL.” is set to –5 dB, 
the volume range becomes –5.0 dB to –80.0 dB.

Control range: 16 dB, 10 dB to –30 dB
Control step: 5 dB

The “MAX VOL.” setting takes priority over the “INI.VOL.” 
setting. For example, if “INI.VOL.” is set to –20 dB and “MAX 
VOL.” is set to –30 dB, the volume level is automatically set to 
–30 dB when you turn on the power of this unit next time.

INI.VOL.

Use this feature to set the volume level when the power of 
this unit is turned on.
Choices: OFF, –80 dB to +16 dB
Control step: 1 dB

The “MAX VOL.” setting takes priority over the “INI.VOL.” 
setting. 

Use this menu to reassign the input jacks, select the 
decoder mode or rename the input source.

■ Input assignment

A)INPUT ASSIGN

Use this feature to assign the input jacks according to the 
component to be used if the initial settings of this unit do 
not correspond to your needs. Change the following 
parameters to reassign the respective jacks and effectively 
connect more components.
Once the input jacks are reassigned, you can select the 
corresponding component by using DINPUT l / h (or 
the input selector buttons (

C)).

For COAXIAL INPUT jack 1
  COAXIAL IN (1)
Choices: (1) CD, MD/CD-R, DVD, DTV/CBL, 

V-AUX, DVR

For OPTICAL INPUT jacks 2 and 3
  OPTICAL IN (2)
  OPTICAL IN (3)
Choices: (2) CD, MD/CD-R, DVD, DTV/CBL, 

V-AUX, DVR

(3) CD, MD/CD-R, DVD, DTV/CBL, 

V-AUX, DVR

You cannot select a specific item more than once.

;MANUAL SETUP

2 INPUT MENU

. A)INPUT ASSIGN

B)INPUT RENAME
C)VOLUME TRIM
D)DECODER MODE
E)MULTI CH SET
[ ]/[ ]:Up/Down

p

p

[ENTER]:Enter

A)INPUT ASSIGN

COAXIAL IN

. (1);;;;; DVD

(

DVD

)

[ ]/[ ]:Select

p

[

2 INPUT MENU

A)INPUT ASSIGN

OPTICAL IN

. (2);;;;;DTV/CBL

(DTV/CBL )

(3)

;;;;;

CD

(

CD

)

[ ]/[ ]:Select

p

[

2 INPUT MENU