Yamaha RX-V463 User Manual

Both FM and AM indoor antennas are supplied with this 
unit. Connect each antenna correctly to the designated 
terminals. In general, these antennas should provide 
sufficient signal strength.

y

See right for connection information of the supplied AM loop 
antenna.

• The AM loop antenna should be placed away from this unit.
• The AM loop antenna should always be connected, even if an 

outdoor AM antenna is connected to this unit.

• A properly installed outdoor antenna provides clearer reception 

than an indoor one. If you experience poor reception quality, 
install an outdoor antenna. Consult the nearest authorized 
Yamaha dealer or service center about outdoor antennas.

y

The wire of the AM loop antenna does not have any polarity 
and you can connect either end of the wire to AM or GND 
terminal.

The types of the supplied AM loop antenna is different 
depending on the models.

Once all connections are complete, plug the power cable 
into the AC wall outlet.

Ground (GND terminal)
For maximum safety and minimum interference, connect the 
antenna 

GND terminal to a good earth ground. A good earth 

ground is a metal stake driven into moist earth.

Outdoor AM antenna
Use a 5 to 10 m (16 to 33 
ft) vinyl-covered wire 
extended outdoors from a 
window.

01EN_RX-V463_U.book  Page 20  Friday, February 1, 2008  11:43 AM