Yamaha RX-V3900 User Manual

■ Video information

Use this feature to automatically set the main zone to the 
standby mode after a certain amount of time. The sleep 
timer is useful when you are going to sleep while this unit 
is playing or recording a source. The sleep timer also 
automatically turns off any external components 
connected to the AC OUTLET(S) (page 25).

Set the operation mode selector to F

AMP and 

then press C

SLEEP on the remote control 

repeatedly to set the amount of time.
The sleep timer setting changes as shown below.

Once the sleep timer is set, the SLEEP indicator lights up 
in the front panel display, and the display returns to the 
selected sound field program.

To cancel the sleep timer
Set the operation mode selector to FAMP and then press 
CSLEEP on the remote control repeatedly to select 
“SLEEP OFF”.

y

If you set the main zone to the standby mode, the sleep timer is 
automatically canceled.

Type of the source video signals and 
the video signals output at the HDMI 
OUT jacks of this unit.

Resolution of the input signal (analog 
or HDMI) and the output signal 
(HDMI). 

Resolution of the source video signals 
and the analog video signals output at 
the COMPONENT MONITOR OUT 
jacks of this unit.

Error message for HDMI sources or 
connected HDMI devices.

The number of the connected HDMI 
components is over the limit.

HDCP authentication failed.

Out of resolution. The connected 
monitor is not compatible with the 
resolution of the input video signal.

120min.

90min.

60min.

30min.

OFF