Yamaha RX-V3900 User Manual

CINEMA DSP 3D mode creates the intensive and 
accurate stereoscopic sound field in the listening room. 
You can activate and deactivate the CINEMA DSP 3D 
mode.

Press P

3D DSP repeatedly to turn on or off the 

CINEMA DSP 3D mode.
While this unit is in the CINEMA DSP 3D mode, the 3D 
indicator lights up.

CINEMA DSP 3D does not activate (“3D:--“ appears) in the 
following cases:
– the “Front Presence” setting is set to “None” (page 88).
– no CINEMA DSP is selected.
– headphones are connected to the PHONES jack.

When this unit is in the STRAIGHT mode, 2-channel 
stereo sources are output from only the front left and right 
speakers. Multi-channel sources are decoded straight into 
the appropriate channels without any additional effect 
processing.

Press N

STRAIGHT (or TSTRAIGHT) to select 

“STRAIGHT”.
The names of the audio signal format of the input source 
and the active decoder appear in the front panel display.

To deactivate the STRAIGHT mode
Press 

NSTRAIGHT (or TSTRAIGHT) again or select 

another sound field program (page 40).

Before performing the following operation, set the operation 
mode selector on the remote control to FAMP.

Before performing the following operation, set the operation 
mode selector on the remote control to FAMP.